Printing comes out very small at the bottom of the page

SketchUp
1

I just downloaded SketchUp 2016 and my document comes out very small at the bottom of the page.
What do I have to do to fix this?

2

You haven’t provided much information for us to go on. At a minimum, could you upload a screenshot of the model view you are trying to print. Better, screenshots of the print setup windows as you get ready to print. Best, also upload the model.

3

Not sure how to upload on this site. AutoSave_Keith Smith desk w top 8-6-16-16.skp (335.0 KB)

List itemWhen I select print this comes out about 1/4" square at the bottom of the 8 x 10 page.

4

can’t get this address to go.

5

https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/slbaumgartner/45/7302_1.png

http://forums.sketchup.com/users/slbaumgartner slbaumgartner SketchUp Sage
August 6

You haven’t provided much information for us to go on. At a minimum, could you upload a screenshot of the model view you are trying to print. Better, screenshots of the print setup windows as you get ready to print. Best, also upload the model.

http://forums.sketchup.com/t/printing-comes-out-very-small-at-the-bottom-of-the-page/28789/2 Visit Topic or reply to this email to respond.

To unsubscribe from these emails, http://forums.sketchup.com/email/unsubscribe/58f5d2d3a75e01d74211232ef4615171897264fdff3b7f978abd00ba6f0d9bdc click here.

Untitled attachment 00139.txt (0 Bytes)

Untitled attachment 00139.txt (0 Bytes)

Untitled attachment 00139.txt (0 Bytes)

Untitled attachment 00148.txt (22 Bytes)

6

Keep getting real small print at bottom of page

Untitled attachment 00139.txt (0 Bytes)

Untitled attachment 00139.txt (0 Bytes)

Untitled attachment 00139.txt (0 Bytes)

Untitled attachment 00148.txt (22 Bytes)

7

I didn’t have any problem printing a view from that model. I suspect that you have SketchUp’s print settings (as opposed to the system printer settings you showed) configured for a scaled output. Either that or you have zoomed out before printing and the view shows the model in only a small part of the window, though from the SketchUp windows in the background of your screenshots that doesn’t seem to be the case.

8

Have you the “Use model extents” box in your Print dialog checked?

Anssi

9

Set the print job parameters via File > Print Preview

See this tutorial…
Printing to Scale — SketchUp Sage Site