I have tryed to doo this tutorial: Sketchup Tutorial: A Dice - YouTube But when I draw the same dice in Sketchup 2017 I get open corners. [Terning] Why is it not alowed to upload an .skb file to this fora?

The extension warehouse has an .stl exporter that works in 2017 Make.

You need to work at a larger scale.

[image] The Dave Method Tutorials The Dave Method is the clever use of components popularized by @DaveR to avoid the tiny face issue. Sketchup fails to form faces when edge segments get down around the 1/1000" mark. However, tiny faces can exist so the workaround has gen…

OK! I understand. I have to draw the dice in a bigger scale, and afterwards scale it down. Is This right?

No, in the Dave Method you make a copy a component, scale it up, and make changes to the scaled up one. Those changes are automatically are applied to your smaller model.

I have changed the template to arcitectural meter scale, drawn a dice, with sides of 3 meters, ofsett to the round corners, 0,5 meter, and I still get thise very small holes, [Terning01]

Yes. The FollowMe tool has a limitation so when you have a corner radius that is the same or smaller than the radius of the fillet you are trying to achieve you get these small anomalies. You can either use Fredo6’s RoundCorner or FredoCorner extension, or , with native tools, first create a full sp…

[image] brassovitski: I still get these very small holes, Try the method described in this tutorial model.

I Have tryed the Dave Method, and I still get’s this small holes. I think I have to try With Fredo6’s RoundCorner or FredoCorner extension. [dice - Dave Method] [dice - Dave Method Zoomed in]

[image] brassovitski: Fredo6’s RoundCorner or FredoCorner extension Fredo6’s RoundCorner or FredoCorner extension. Which would you recommend to use?

[image] brassovitski: Why is it not alowed to upload an .skb file to this fora? Those are backup files. Upload the .skp file instead. [image] brassovitski: I Have tryed the Dave Method, and I still get’s this small holes. Those aren’t holes. They are excess edges that only need to be …

Can't draw a dice, with rounded corners

SketchUp

Box December 14, 2019, 8:05pm 3

Topic		Replies	Views
Error when trying to create rounded edge SketchUp modeling	1	1221	October 16, 2017
How do I round corners in SketchUp free version? SketchUp advice	27	95772	May 5, 2020
Need some advice on how to build a shape and round the corners Pro advice , modeling	26	4150	November 14, 2015
Legitimate Sketchup glitch? Pro	36	2048	January 5, 2019
Rounded edges for wood knob SketchUp	27	5517	January 15, 2018

Can't draw a dice, with rounded corners

Related topics