Model Info -> Units -> Display precision -> Length (change default)

SketchUp
1

Dear All,

Please assist in changing default parameter for this dimensions:
image

By SketchUp default it is 0.0 mm, I need 0.00 mm.

Thank you.

2

Choose 0.00mm then save it as your template.
While you are there Untick Enable length snapping, it only causes errors.

1 Like
3

Thank you, but saving as a template doesn’t help :frowning:
Still shows 0.0 mm.

4
  • Set what you need in Window > Model Info > Units
  • Go to File > Save As Template...
  • Make sure you check ‘Set as a default template’
    tmp-02b

Then open a new file… File > New.

1 Like