Bonjour, je n’arrive pas à avoir un tuyau avec un coude sans trou ! je fais un angle 90° j’ajoute un arc de cercle deux points après sur un bout je fais un cercle du diamètre du tuyau et bien dans l’angle il manque des arrêtes ! Savez-vous pourquoi ? J’utilise la version 2023. J’ai remarqué que …

Bonjour. It would help if you upload your model as it is now. Or at least some screneshot(s). So we can see what you have and are trying to create.

[a-2023-08-06 153348] Sorry, the first time I couldn’t put the image because I had the google translator. Here’s what it does and again I’m not doing too badly because sometimes it misses almost the whole angle! THANKS

Have a look here. [image] The Dave Method Tutorials The Dave Method is the clever use of components popularized by @DaveR to avoid the tiny face issue. Sketchup fails to form faces when edge segments get down around the 1/1000" mark. However, tiny faces can exist so the …

ok thank you for the info I tried 10 times bigger it was much better but not yet enough to fill everything correctly I will try bigger to see it must be said that my tube is only 6mm in diameter. Thanks again have a good evening.

[image] Kcirtap: but not yet enough to fill everything correctly When I use the “Dave Method” I scale up by a factor of 1000. Sometimes that’s larger than needed but it is almost never smaller than needed.

[image] DaveR: When I use the “Dave Method” I scale up by a factor of 1000. Sometimes that’s larger than needed but it is almost never smaller than needed. OK, thanks a lot

Affichage des arrêtes manquante

Extending SketchUp

Box August 7, 2023, 2:31pm 4

Have a look here.

Topic		Replies	Views
Follow me tool Pro follow-me-tool	6	1224	November 16, 2018
What did I do wrong? SketchUp	2	875	December 12, 2021
Legitimate Sketchup glitch? Pro	36	2164	January 5, 2019
Corners when extruding along path SketchUp	6	656	January 9, 2023
Follow me tool and merging lines SketchUp	7	2225	July 26, 2018

Affichage des arrêtes manquante

Related topics