Box
December 24, 2017, 7:35am
5
You need to reface the hole to be able to Push it through. There are extra internal faces that should be removed, you can see me doing that through the hole.
You are also working at the extreme end of the scale when it comes to SU tolerance of tiny edges. You should be looking at working with this method.
The Dave Method is the clever use of components popularized by @DaveR to avoid the tiny face issue.
Sketchup fails to form faces when edge segments get down around the 1/1000" mark. However, tiny faces can exist so the workaround has generally been to scale up your geometry, edit it, then scale back down.
This works, but can lead to some issues.
The Dave Method leverages the power of components to make life easier.
The basic concept is, you start with a component set at the size you want, t…
