All operations are extremely slow on a brand a new machine. It has two ssd hard drives, C an D. The hardware is more than adequate. I bought it because it should be lightning fast. Our models work great on all our other machines, even the older ones. The graphics card is NVIDIA GTX 980m and Ske…

[image] Kenny: If it’s not extensions and you suspect it is RAID then you could try changing the settings in the BIOS to temporarily disable RAID. don’t mess with RAID until you know what you do, wrong settings can render your data medium inaccessible… and also not very reasonable because a R…

This doesn’t sound like it has anything to do with the SSD - SketchUp shouldn’t be reading or writing anything during those operations. As @Kenny suggested, the first place I’d try is disabling all plugins and extensions to make sure a misbehaving one (especially one with observers) isn’t the issue…

As I say I have the same processor (and 32 GB RAM). If you would like to try a test, open the attached file and run the sandbox from contours on it. It takes just over 2 minutes on my PC for it to complete the action. I’m no expert but I don’t think that this should be influenced by the graphics car…

[image] Kenny: If it’s not extensions and you suspect it is RAID then you could try changing the settings in the BIOS to temporarily disable RAID. A Raid 0 array cannot be “temporarily disabled”; therein, data is striped across both drives. Lose one drive in a Raid 0 array; lose all. Raid 0…

Thanks for all your suggestions. Yes I have reinstalled SU multiple times on both C and D drives. Extensions are all disabled. The Sandbox test completed in under 2 mins. I agree, I don’t think it’s the processor. I will run the perfkit from NVIDIA. The IT ran something similar but this one lo…

You might have a look at this topic… [image] Cannot save drawing-cannot open drawing SketchUp Recently downloaded Sketchup Pro 2015. Used a couple days and begin saving very slowly. Finally just got to where the save just kept running and never did finish. Started trying t…

[image] dvdspr: Operations like moving, copying groups and components, any operations in SketchUp are extremely slow and the blue wheel comes up. The outliner flashes blank and populated several times with each operation. The Outliner is notorious for slowing operations down. It should never …

[image] slbaumgartner: This doesn’t sound like it has anything to do with the SSD - SketchUp shouldn’t be reading or writing anything during those operations. SketchUp writes to the Undo log files in the User’s %LocalAppData%/Temp directory. There is a hidden registry entry for number of und…

While Su is running open task manager, select the performance tab, select the resource monitor. That will bring up several split screens allowing you to get idea of internals. It sounds like there may be memory leak of some type. The max speed is around 3.5GHZ, are you over clocking you PC. SU Is …

This might be a lame suggestion but the last time I got a new computer someone had forgotten to enable all the cores of the processor. The multiple core are off by default. It’s in the System Settings somewhere and I don’t remember how to get there. It’s such an obvious thing it’s easy to overlook.

SketchUp operations are extremely slow on new ssd computer

Technical Problems SketchUp

Geo April 24, 2015, 6:06pm 12

You might have a look at this topic…

Topic		Replies	Views
SketchUp is suddenly very slow Pro	49	32235	December 3, 2022
What is the ultimate RIG one can use to run Sketchup? Pro performance	46	6918	March 1, 2018
What is wrong with my computer? SketchUp	29	6748	March 24, 2016
Extreme slowness when matching photo SketchUp	20	6697	January 18, 2016
Hardware Acceleration Doesn't Appear SketchUp advice	16	1910	May 6, 2024

SketchUp operations are extremely slow on new ssd computer

Related topics