Big Workbench #4.skp (761.9 KB) [image] Workbench with Vises (Revised) Gallery Face and Tail Vise Parts #1.skp (173.3 KB) Big Workbench #3.skp (759.2 KB) I started a new topic, because I marked the other one as solved. (I think that’s the right protocol.) I took the scre…

A. Long Bench Top Bench.skp (459.6 KB) [B. Iso with Tags] [C. Exploded; X-Ray; Hid. Geo.] [D. Leg Inset - Dims. & Notes] [E. Short Stretcher Inset - Dims. & Notes] [F. Chop Inset - Dims. & Notes] [G. Top Inset - Dims. & Notes] When I replace my Bench Top Bench, I’m going to replace it w…

A. Coffee Table Version 1 #1.skp (394.5 KB) [B. Iso with Tags] [C. Exploded; X-Ray; Hid. Geo.] [D. Base Inset - Dims. & Notes] [E. Drawer Inset - Dims. & Notes] [F. Top Inset - Dims. & Notes] I watched a video at the Woodsmith Website about a coffee table like this. There’s of course was …

A. Tool Holder 1 #1.skp (460.7 KB) [B. Iso with Tags] [C. Exploded; X-Ray; Hid. Geo.] [D. Frame & Panel - Dims. & Notes] [E. Hangers - Dims. & Notes] [F. Page - Dims. & Notes] After seeing a picture of a tool holder in WoodSmith Magazine online, I had to model these. One to hang and one t…

A. Joinery Sled #1.skp (695.4 KB) [B. Iso with Tags] [C. Exploded; X-Ray; Hid. Geo.] [D. Inset #1 - Dims. & Notes] [E. Inset #2 Dims. & Notes] I [F. Inset #3 - Dims. & Notes] I apologize for the scenes being too busy with notes. This was a complicated sled based on a commercial one. I thi…

[B. Iso with Textures] A. Eastern Towhee #1.skp (673.6 KB) Here’s another bird we see in the Winter season that loves bird seed and pecans.

A. Magazine Shelf #1.skp (378.2 KB) [B. Iso with Tags] [C. Exploded; X-Ray; Hid. Geo.] [D. Base - Dims. & Notes] [E. Shelf - Dims. & Notes] I had some fun with the Stretchers and the Z-clip. :wink:

A. White Oak Leaf Panel #1.skp (283.5 KB) [B. Iso with Tags] [C. Exploded; X-Ray; Hid. Geo.] [D. Dims. & Notes with Tags] To make the oak leaf after tracing the outline of one-half of the leaf on the image, I had to flip copy it on the blue axis. But before that I had to orient as best as I c…

A. Another Dog Add-on #1.skp (105.9 KB) [B. Iso with Tags] [C. Exploded; X-Ray; Hid. Geo.] [D. Dims. & Notes] This is based on a tip in the Woodsmith Magazine members’ website. You tighten and loosen it with a Ratchet Wrench.

[1. d. Dims. & Notes with Textures] [1. c. Exploded; X-Ray; Hid. Geo.] [1. b. Iso with Textures] 1 a. Carved Frame & Panel #1.skp (360.4 KB) I chose the color of the flower from a picture of a flower called Pink Dame’s Rocket.

[D. Dims. & Notes] [C. Exploded; X-Ray; Hid. Geo.] [B. Iso with Tags] A. Hold-Down #1.skp (143.8 KB) I dreamed this up because my spouse complained about noise when I hammered a hold fast. I would have to make a prototype to see if it works.:wink:

Models by Royce

SketchUp Gallery

Royce January 28, 2026, 8:53pm 614

A. Magazine Shelf #1.skp (378.2 KB)

I had some fun with the Stretchers and the Z-clip.

Topic		Replies	Views
Cotty's gallery images Gallery render , gallery	1097	81070	December 24, 2025
Hobby mihai.s Gallery sketchup , hobby	531	31819	May 21, 2026
Introduction and Questions SketchUp	83	2561	April 22, 2022
Something has gone awry, I don't know what or how Pro	72	4025	April 19, 2019
IanT's Experimental Gallery Gallery styles , sketchup , render , layout , twilight	131	14332	November 29, 2020

Models by Royce

Related topics