To print the model must be solid. To do that it needs to be a component which it is not:
The model has some extraneous geometry far removed from basic model and they are located at orgin;
The model should be moved to orgin once those are removed.
After all those corrections the model is not solid yet and thus not printable.
For the model to be solid you can look at as needing to be water tight.
Download and install solid inspector and ThomThom’s cleanup tools from the 3d extension ware house both of which will help you make those corrections.
In addition Trimble has a free program that will check model for you. I do not have link for that and will have to get it for you, Surprised if its not on the 3d print forum
Before doing that you need to spend some time at the help center and read what they have on this subject.
You should also download and install TIGs solid solver which will some times fix model for you.
Get back for further help you will probably need it: smile:
Link Printables for 3D Warehouse - SketchUp - SketchUp Blog
1 Like