Hi I don’t know if this is even possible or not, but I’m trying to draw a line to 60 degrees from an existing 7 degree angle if that make senses. I will attach if a image that will hopefully clarify my issue: [image]

It would be easier to attach your .skp model so we can better understand what you want, your screenshot does not quite explain it. Do you mean a line parallel with the bottom line you highlighted? If so then use the line tool and inference that line, when you get the magenta indicator it indicates…

Here is the file: Darko Defender.skp (31.5 KB)

Refer to the control panel - I am designing an Arcade Machine

I opened your file, it’s a bit of a mess and I still don’t know which line you are trying to draw. There are very few coplanar edges in your model so no faces can exist over the framework you currently have. Are you trying to face this box?

[image] endlessfix: coplanar edges To be honest with you, I have no idea what I’m doing. I only started using this program like 3 days ago. Can you send me screenshot of what you are seeing. It seems to look fine on the original file

Thanks. I am aware there are no faces it is probably because it crooked, and its because I don’t know how to create that 60 degree line from the 7 degree line. I don’t know if that makes any sense

1 Draw side wall in full lenght (300) from point 225 draw guide 60 deg. [sf] 2 Extrude this wall to half dimension [sf] 3. Draw lines: from A to B and from this points up to top edges. Now you have points A’ and B’ , when you draw line between, you create inner wall [sf] 4. Remove unnecessary…

Draw a line at two angles

SketchUp

endlessfix July 7, 2022, 6:46am 7

If the original file is the one you shared there are many surfaces missing from the box shape. They will not form because your geometry is crooked or out of square. You might benefit from a little time learning the basics of SketchUp.

Topic		Replies	Views
Angled line SketchUp Free	12	11788	October 20, 2021
I'm finding it impossible to draw a single line at any given angle Pro	6	5973	July 10, 2018
Layout - drawing angled lines LayOut	6	6056	November 2, 2017
Drawing Shapes with Angles In One Step Pro anglesnapping	10	1989	August 26, 2021
How do I draw a line at a specific angle that intersects another edge? SketchUp advice	7	1388	October 21, 2020

Draw a line at two angles

Related topics