Thank you. It didn’t take too teribly long to do. Part of the speed comes from leveraging the
components.
That makes sense.
So easily removed from the model and the related dimensions and label deleted.
May I suggest that you leave the top and the dividers separate? That’ll make it easier to fit together both during construction and later when doing maintenance. The dividers can still be inserted into dadoes in the sides but not glued so they could be removed during cleaning.
I figure since you’re going to be cutting the dadoes for the dividers, it is easy enough to cut rabbets on the ends of the sides. The rabbets mean that the front and back would be the same size as the dividers so they’ll be easier to batch cut. The rabbets will also make it easier to locate the ends during assembly. You could add some small blocks to the underside of the lid to help keep it located on top of the walls.