I am building a casing for a sumobot’s electronics and I can’t seem to thicken a wall of of one of the sides. The file is box.skp (273.1 KB) Can anyone try and get all the walls to be 1cm thick without impeding the interior. Thanks

Would you be able to do this for me and send it back. The bottom only does need to be as it needs to be possible to 3d print. At school the whole thing has to be slightly thick to be able to 3d print. The outside needs to be 10by 10 and the inside has to be 9 by 7.

[image] 18000494: The bottom only does need to be as it needs to be possible to 3d print I don’t know what this means. Are the external dimensions correct? [Screenshot%20-%203_5_2019%20%2C%2012_25_44%20PM] Do you really want the walls to be 1 centimeter thick? That won’t leave much room o…

Maybe 5mm thick would be better and I do need the extrusion for an ultrasonic to sit in.

What about the hole in the end, then?

I do need it. It’s for the ultrasonic sensor to be stuck in.

[Screenshot%20-%203_5_2019%20%2C%2012_32_31%20PM]

What are the measurements of the inside?

I used the outside dimensions of the box you drew, made the walls 5 mm thick and put the hole at the same height above the bottom and made it the same height you had. [Screenshot%20-%203_5_2019%20%2C%2012_34_52%20PM] What sort of transducer goes into it?

Its a raspberry pi and an ultrasonic sensor TruSens HC-SR504 Ultrasonic Ranging Module | Rapid Online

Can't thicken wall of project

SketchUp for Web SketchUp Free

DaveR March 5, 2019, 6:24pm 2

Yes. But the model is so poorly constructed that the easiest way to do this is start over. Is the bottom supposed to be 1 cm thick, too?

Topic		Replies	Views
I need help filling out walls! 3D Printing sketchup , advice , modeling	16	4857	December 7, 2017
Making wall thickness SketchUp advice , mac , modeling	14	1674	June 24, 2023
Give object thickness for 3d printing SketchUp 3dprinting	5	6557	February 29, 2020
Thick with sketchup 3D Printing	4	2174	June 8, 2015
Easy Way To Create Wall Thickness On Complex Shape? SketchUp	3	10884	January 5, 2015

Can't thicken wall of project

Related topics