I need to draw a 45° ellipse, the X (outside) being 2". There will be an inside ellipse, and it will be .075" thick. In short, a ring. Following SketchUp’s instructions, I drew the circle, then used the scale tool, but I only get a handle on the lower left. and no indication of the angle. Where am I…

CADtutor ellipse 45 [eli-03] CADforum ellipse 45 [eli-02]

Having watched mihal.s’ solution it trigerred a deep memory back to my engineering drawing lessons at school circa 1970 when we were forced to draw ellipses according to a vertical scale which is here; 5°= 10% vertical scale. 10° = 18% vertical scale. 15° = 26% vertical scale. 20° = 34% vertical…

Yet another item from my drafting museum: [image]

Speaking of the drafting museum, I have one of those green plastic templates. Great for drawing an ellipse on paper or plastic, but cutting it on plastic with any reasonable accuracy is another story. The ring is going to be 3D printed and used on a scale model of a sign on a building, so a better d…

Fine, but I’m not getting the six handles on the drawing, just one. Any idea where I’m going wrong?

Sounds like you are using the wrong tool, can you give us a screenshot of what you see.

Here’s another option. [Elipse] I’ve changed the gif as the original method I showed is prone it inaccuracies.

[image] JWTCA: but I’m not getting the six handles on the drawing, just one. What version of SketchUp are you using? Your profile says 2015 Free (web) which can’t be right. Are you using the Scale tool or some other tool?

Interesting use of Sandbox Tools to get an orthographic projection.

Problem with drawing ellipse

SketchUp

DaveR January 12, 2022, 1:34pm 4

I knew that once, too. Notsure I’ve ever needed to model an ellipse defined that way but a good thing to try to remember for the future.

1 Like

Topic		Replies	Views
Drawing ellipses SketchUp	6	24728	January 8, 2022
I just want to make an ellipse why is this so hard? SketchUp	4	3810	October 26, 2018
Is sketchup capable of drawing an elipse SketchUp	15	8291	January 16, 2016
Sketchup keeps dividing my ellipse up making it difficult to select entire ellipse SketchUp Free	9	184	October 16, 2024
Ellipse to circle transition elbow SketchUp Free advice , geometry , help	6	1305	January 17, 2023

Problem with drawing ellipse

Related topics