In the same model. And I don’t produce dimensioned drawings, generally speaking. When I check dimension in the plan to the model, to check accuracy, if the plan shows me a dimension to the 1/16 (which, frankly, is sloppy work on the part of the architect because framing is generally not done to the 1/16), to check that measurement in the model to 1/4, doesn’t show me quite what I need to see. If the plan dimension shows me a dimension to feet / inches / 3/16", then seeing that rounded to 1/4" when I measure it in the model, isn’t what I need to be seeing. I need to see that 3/16.