# There has to be an easier way to build a lattice component

**URL:** <https://forums.sketchup.com/t/there-has-to-be-an-easier-way-to-build-a-lattice-component/133725>\
**Category:** SketchUp\
**Created:** [August 16, 2020, 2:05pm UTC](https://forums.sketchup.com/t/there-has-to-be-an-easier-way-to-build-a-lattice-component/133725 "2020-08-16T14:05:03Z")\
**Posts on this page:** 1\
**Showing post:** 13

<div class="post-metadata">

**Author:** ![Zvonko](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/zvonko/32/189809_2.png) [@Zvonko](https://forums.sketchup.com/u/Zvonko)\
**Post date:** [August 17, 2020, 2:08am UTC](https://forums.sketchup.com/t/there-has-to-be-an-easier-way-to-build-a-lattice-component/133725/13 "2020-08-17T02:08:40Z")

</div>

> [@slbaumgartner](#):
>
> Not what you were asking about, but be aware that the casters contain over 99% of the edges in the model (334484 of 335232)! I imagine you imported them from the 3D Warehouse, where over-detailed models are a common issue.

Yes I did. It was even worse when I first downloaded the caster. Fortunately, I got help quickly after I posted [this](https://forums.sketchup.com/t/ridiculously-large-blue-box-around-component-from-3d-warehouse/133259).

---

_[View the full topic](https://forums.sketchup.com/t/there-has-to-be-an-easier-way-to-build-a-lattice-component/133725)._