# Solid Inspector²

**URL:** <https://forums.sketchup.com/t/solid-inspector/5117>\
**Category:** Extensions\
**Created:** [December 20, 2014, 5:57pm UTC](https://forums.sketchup.com/t/solid-inspector/5117 "2014-12-20T17:57:27Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![jim\_foltz](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/jim_foltz/32/74787_2.png) [@jim\_foltz](https://forums.sketchup.com/u/jim_foltz)\
**Post date:** [December 20, 2014, 6:28pm UTC](https://forums.sketchup.com/t/solid-inspector/5117/3 "2014-12-20T18:28:58Z")

</div>

It looks awesome. Thank you.

I broke it on this gentleman’s model: [Print-ready 3d?](http://forums.sketchup.com/t/print-ready-3d/5050)

The first thing to note is how much longer the third base takes to analys in spite of being very similar to the first 2 selected bases.

Then I get an error after some time on the boat.

[![]( " - YouTube") ](https://www.youtube.com/watch?v=fe1mMHSQqm8)

---

_[View the full topic](https://forums.sketchup.com/t/solid-inspector/5117)._