# \[Solid Inspector 2\] Uncaught error?

**URL:** <https://forums.sketchup.com/t/solid-inspector-2-uncaught-error/25205>\
**Category:** Extensions\
**Created:** [May 16, 2016, 8:12am UTC](https://forums.sketchup.com/t/solid-inspector-2-uncaught-error/25205 "2016-05-16T08:12:57Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![les\_booyse](https://avatars.discourse-cdn.com/v4/letter/l/ebca7d/32.png) [@les\_booyse](https://forums.sketchup.com/u/les_booyse)\
**Post date:** [May 16, 2016, 8:12am UTC](https://forums.sketchup.com/t/solid-inspector-2-uncaught-error/25205/1 "2016-05-16T08:12:57Z")

</div>

Continuing the discussion from [Solid Inspector²](http://forums.sketchup.com/t/solid-inspector/5117):

I have been using your excellent Solid Inspector for some months, and today have caught my first bug. The error report is attached, as it is really long. I have also attached the guilty group for you to look over.

I took the model to another PC with an almost identical setup, and the solid passes with no errors. Your help would be appreciated.

This extension is amazingly useful! Thank you!

Les  
[InternalWalls.skp](https://forums.sketchup.com/uploads/short-url/802p5dj2MpnW1NPpWx7G8tX039P.skp) (179.3 KB)  
[SI Error Report.txt](https://forums.sketchup.com/uploads/short-url/pSD7Ok883baUbJ1tYKVBTUT0z5n.txt) (35.3 KB)

---

<div class="post-metadata">

**Author:** ![mac7595](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/mac7595/32/650_2.png) [@mac7595](https://forums.sketchup.com/u/mac7595)\
**Post date:** [May 16, 2016, 8:45pm UTC](https://forums.sketchup.com/t/solid-inspector-2-uncaught-error/25205/2 "2016-05-16T20:45:47Z")

</div>

check how you have layers set

---

<div class="post-metadata">

**Author:** ![thomthom](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/thomthom/32/12606_2.png) [@thomthom](https://forums.sketchup.com/u/thomthom)\
**Post date:** [June 27, 2016, 7:41pm UTC](https://forums.sketchup.com/t/solid-inspector-2-uncaught-error/25205/3 "2016-06-27T19:41:49Z")

</div>

> [@les\_booyse](#):
>
> I have been using your excellent Solid Inspector for some months, and today have caught my first bug. The error report is attached, as it is really long.

Which version are you using? The later versions of SI pops up a dialog when it run into an error - no more need to copy paste into the forums. Can you please check that you have the latest version?

---

<div class="post-metadata">

**Author:** ![les\_booyse](https://avatars.discourse-cdn.com/v4/letter/l/ebca7d/32.png) [@les\_booyse](https://forums.sketchup.com/u/les_booyse)\
**Post date:** [June 27, 2016, 9:38pm UTC](https://forums.sketchup.com/t/solid-inspector-2-uncaught-error/25205/4 "2016-06-27T21:38:30Z")

</div>

Thom

I am in the middle of upgrading some of my CAD software, and will check that I have the latest version of SI when I do SketchUp.

Thank you for writing SI – I am in awe of people like you who can code successfully.

Regards

Les
