# Solar Modeling - How to

**URL:** <https://forums.sketchup.com/t/solar-modeling-how-to/79698>\
**Category:** Pro\
**Tags:** advice\
**Created:** [October 23, 2018, 1:02am UTC](https://forums.sketchup.com/t/solar-modeling-how-to/79698 "2018-10-23T01:02:44Z")\
**Posts on this page:** 13\
**Page:** 1

<div class="post-metadata">

**Author:** ![sproutsradio](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/sproutsradio/32/4545_2.png) [@sproutsradio](https://forums.sketchup.com/u/sproutsradio)\
**Post date:** [October 23, 2018, 1:02am UTC](https://forums.sketchup.com/t/solar-modeling-how-to/79698/1 "2018-10-23T01:02:44Z")

</div>

I have been using SketchUp for quite a while to model building designs. The “Shadows” tool has been a real asset in refining the designs to maximize or minimize isolation.  
Okay, except I think I have missed a basic bit of method.  
The shadows tool has a north/south orientation. If I rotate my model to reflect how it actually sits on the site then drawing becomes difficult because things like the rectangle tool don’t orient with the new wall lines.  
Not sure I am describing this well. Any clues? My thanks

---

<div class="post-metadata">

**Author:** ![Forestr](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/forestr/32/64230_2.png) [@Forestr](https://forums.sketchup.com/u/Forestr)\
**Post date:** [October 23, 2018, 1:39am UTC](https://forums.sketchup.com/t/solar-modeling-how-to/79698/2 "2018-10-23T01:39:08Z")

</div>

Changing the axes will allow you to orient rectangles to the wall lines. Also, I think adding a geolocation in your model info will increase the accuracy of your shadows.

---

<div class="post-metadata">

**Author:** ![sproutsradio](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/sproutsradio/32/4545_2.png) [@sproutsradio](https://forums.sketchup.com/u/sproutsradio)\
**Post date:** [October 23, 2018, 1:55am UTC](https://forums.sketchup.com/t/solar-modeling-how-to/79698/3 "2018-10-23T01:55:17Z")

</div>

So I can change the axis of my model working space but still retain the proper orientation for the shadow rendering?

---

<div class="post-metadata">

**Author:** ![Forestr](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/forestr/32/64230_2.png) [@Forestr](https://forums.sketchup.com/u/Forestr)\
**Post date:** [October 23, 2018, 1:57am UTC](https://forums.sketchup.com/t/solar-modeling-how-to/79698/4 "2018-10-23T01:57:25Z")

</div>

Yes. I just tried it out. Fingers crossed.  
 ![1](https://global.discourse-cdn.com/sketchup/original/3X/a/c/ac2fdd852837b46990f64a7bb418fe3b2d6f1305.png)  
 ![2](https://global.discourse-cdn.com/sketchup/original/3X/e/e/ee140790f3ce7dd1d13fc87e02d66c43ce42ae0f.png)

---

<div class="post-metadata">

**Author:** ![sproutsradio](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/sproutsradio/32/4545_2.png) [@sproutsradio](https://forums.sketchup.com/u/sproutsradio)\
**Post date:** [October 23, 2018, 2:00am UTC](https://forums.sketchup.com/t/solar-modeling-how-to/79698/5 "2018-10-23T02:00:57Z")

</div>

Excellent! How exciting!  
Thanks. That helps a lot.

---

<div class="post-metadata">

**Author:** ![Forestr](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/forestr/32/64230_2.png) [@Forestr](https://forums.sketchup.com/u/Forestr)\
**Post date:** [October 23, 2018, 2:02am UTC](https://forums.sketchup.com/t/solar-modeling-how-to/79698/6 "2018-10-23T02:02:00Z")

</div>

No problem. If it doesn’t work, there’s always undo.

---

<div class="post-metadata">

**Author:** ![Geo](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/geo/32/82_2.png) [@Geo](https://forums.sketchup.com/u/Geo)\
**Post date:** [October 23, 2018, 2:21am UTC](https://forums.sketchup.com/t/solar-modeling-how-to/79698/7 "2018-10-23T02:21:05Z")

</div>

> [@sproutsradio](#):
>
> I think I have missed a basic bit of method.

See this topic and then feel free to ask followup questions.

> [@North Orientation](https://forums.sketchup.com/t/north-orientation/71487/3):
>
> North is only one of four parameters you must set to display shadows that accurately portray the real world. • Geographic Orientation — Relationship of True North to the model. • Geographic Location — Latitude and Longitude • Time — Year, Month, Day, Hour and Minute • UTC Offset — The difference between local time and the Coordinated Universal Time standard. By default, the +Y solid green Axis is true north to the shadow engine. However, the +Y Axis is no longer true north if you geo-…

* * *

**Solar North** — Extension Warehouse  
Provides tools for you to set and display the solar north angle.  
[https://extensions.sketchup.com/en/content/solar-north](https://extensions.sketchup.com/en/content/solar-north)

---

<div class="post-metadata">

**Author:** ![eric-s](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/eric-s/32/55392_2.png) [@eric-s](https://forums.sketchup.com/u/eric-s)\
**Post date:** [October 23, 2018, 2:26am UTC](https://forums.sketchup.com/t/solar-modeling-how-to/79698/8 "2018-10-23T02:26:17Z")

</div>

That was going to be my recommendation. Yeah solar North is a lifesaver for landscape and visualization because sometimes you have to ‘fake’ north in order to get a view out of deep shade…without rotating the whole model as it may affect scene, hidden geometry, etc.

---

<div class="post-metadata">

**Author:** ![Geo](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/geo/32/82_2.png) [@Geo](https://forums.sketchup.com/u/Geo)\
**Post date:** [October 23, 2018, 2:33am UTC](https://forums.sketchup.com/t/solar-modeling-how-to/79698/9 "2018-10-23T02:33:24Z")

</div>

I believe the OP’s question is more about solar accuracy than aesthetics.  
Before SU 8 it was a bit more challenging, as evidenced by this article from the SU 7 era.

[https://sites.google.com/site/sketchupsage/master/geo/creating-real-world-shadows](https://sites.google.com/site/sketchupsage/master/geo/creating-real-world-shadows)

---

<div class="post-metadata">

**Author:** ![RTCool](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/rtcool/32/181048_2.png) [@RTCool](https://forums.sketchup.com/u/RTCool)\
**Post date:** [October 23, 2018, 3:33am UTC](https://forums.sketchup.com/t/solar-modeling-how-to/79698/10 "2018-10-23T03:33:03Z")

</div>

It’s always good to have a choice of more than one way to achieve the results you want.

+1 on Solar North extension as a first choice solution

Leaving the green axis as north and rotating your building also works (maybe your only choice with the web version, yes?). Then you have more than one way to deal with adjusting axes as mentioned.

You can adjust the axes for the whole model, or, maybe conceptually a little cleaner, is making a group or component of your building and adjusting the axes for the group/component to be plumb and square to it. Using a component would be good for a repeating building like a condo unit on a site where it may be turned in different directions in each instance. No matter which way each instance is, the local axes for the building align squarely.

On a similar note, for a house with a wing at 45° grouping each part and setting the axes for plumb and square to that part makes working on each part easy without having to change the universal axes back and forth.

 ![House%20%20%2045%C2%B0%20wing%2020181022%231](https://global.discourse-cdn.com/sketchup/original/3X/e/4/e4d6c63800a64790a5e6a681ddc0e973663b0f11.gif)

---

<div class="post-metadata">

**Author:** ![sproutsradio](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/sproutsradio/32/4545_2.png) [@sproutsradio](https://forums.sketchup.com/u/sproutsradio)\
**Post date:** [October 23, 2018, 1:38pm UTC](https://forums.sketchup.com/t/solar-modeling-how-to/79698/11 "2018-10-23T13:38:43Z")

</div>

Thanks very much, look forward to trying things out.

---

<div class="post-metadata">

**Author:** ![Geo](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/geo/32/82_2.png) [@Geo](https://forums.sketchup.com/u/Geo)\
**Post date:** [October 23, 2018, 2:54pm UTC](https://forums.sketchup.com/t/solar-modeling-how-to/79698/12 "2018-10-23T14:54:28Z")

</div>

> [@RTCool](#):
>
> Leaving the green axis as north and rotating your building also works (maybe your only choice with the web version, yes?).

@sproutsradio, @RTCool brings up a good point.

It’s difficult (read impossible) to give detailed advice when you have failed to provide those willing to help you with the information necessary to do so.

Kindly revisit and complete your forum profile.  
Providing your OS, SketchUp Version and Graphics Card info is how you help us help you.

---

<div class="post-metadata">

**Author:** ![sproutsradio](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/sproutsradio/32/4545_2.png) [@sproutsradio](https://forums.sketchup.com/u/sproutsradio)\
**Post date:** [October 23, 2018, 4:30pm UTC](https://forums.sketchup.com/t/solar-modeling-how-to/79698/13 "2018-10-23T16:30:34Z")

</div>

Thanks, just did that.
