# SketchUp display of model does not fill SketchUp window

**URL:** <https://forums.sketchup.com/t/sketchup-display-of-model-does-not-fill-sketchup-window/236218>\
**Category:** Pro\
**Created:** [July 22, 2023, 1:20pm UTC](https://forums.sketchup.com/t/sketchup-display-of-model-does-not-fill-sketchup-window/236218 "2023-07-22T13:20:04Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![youngmisterlion](https://avatars.discourse-cdn.com/v4/letter/y/edb3f5/32.png) [@youngmisterlion](https://forums.sketchup.com/u/youngmisterlion)\
**Post date:** [July 22, 2023, 1:20pm UTC](https://forums.sketchup.com/t/sketchup-display-of-model-does-not-fill-sketchup-window/236218/1 "2023-07-22T13:20:04Z")

</div>

![2023-07-22_15h16_06](https://global.discourse-cdn.com/sketchup/original/3X/2/e/2ec4cb26271fab47d9dd54c87a994b92c0d95f69.png)  
Hello, the model display does not fill the normal extent of the model display area. I use multiple external monitors. I disconnected them and test the display on my laptop only. I also restarted my laptop. The problem persists.

---

<div class="post-metadata">

**Author:** ![ateliernab](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/ateliernab/32/198399_2.png) [@ateliernab](https://forums.sketchup.com/u/ateliernab)\
**Post date:** [July 22, 2023, 1:41pm UTC](https://forums.sketchup.com/t/sketchup-display-of-model-does-not-fill-sketchup-window/236218/2 "2023-07-22T13:41:35Z")

</div>

Yeah it’s linked to that

> [@Cursor display not on target](https://forums.sketchup.com/t/cursor-display-not-on-target/236220):
>
> My cursor does not display on target. If I hover over an object and select, the selection misses. I select objects I need to position the cursor above and to the right of them.

You need to zoom down your windows scaling when using Sketch up

more about it here :

> [@Modelling area workspace in 2023 is only 25% of the total areA](https://forums.sketchup.com/t/modelling-area-workspace-in-2023-is-only-25-of-the-total-area/221320/12):
>
> I was having the same issue and contacted SU support. I’m on Windows 10 and had my display setting at 125% scaling (older eyes). I reset the scaling in the windows display setting back to 100% and regained the full area of the workspace window. I also updated my Nvidia driver, rebooted, etc. I’m using an Nvidia Quadro 2000 graphics card, which I’m guessing is now about five years old. SU 2022 does not have the same issue; it seems to be a 2023 problem.

---

<div class="post-metadata">

**Author:** ![youngmisterlion](https://avatars.discourse-cdn.com/v4/letter/y/edb3f5/32.png) [@youngmisterlion](https://forums.sketchup.com/u/youngmisterlion)\
**Post date:** [July 22, 2023, 2:27pm UTC](https://forums.sketchup.com/t/sketchup-display-of-model-does-not-fill-sketchup-window/236218/3 "2023-07-22T14:27:22Z")

</div>

yes. that worked! Thanks so much.