# SketchUp 2016 Make with OpenStudio Crashes

**URL:** <https://forums.sketchup.com/t/sketchup-2016-make-with-openstudio-crashes/22161>\
**Category:** SketchUp\
**Created:** [March 16, 2016, 6:45pm UTC](https://forums.sketchup.com/t/sketchup-2016-make-with-openstudio-crashes/22161 "2016-03-16T18:45:53Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![Ram5931](https://avatars.discourse-cdn.com/v4/letter/r/ecc23a/32.png) [@Ram5931](https://forums.sketchup.com/u/Ram5931)\
**Post date:** [March 16, 2016, 6:45pm UTC](https://forums.sketchup.com/t/sketchup-2016-make-with-openstudio-crashes/22161/1 "2016-03-16T18:45:53Z")

</div>

Hello,  
I have SketchUp Make 2016 with Open Studio version 1.10.0. When I go to File- Open SketchUp crashes. Anybody know why or any suggestions?

---

<div class="post-metadata">

**Author:** ![DanRathbun](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/danrathbun/32/500_2.png) [@DanRathbun](https://forums.sketchup.com/u/DanRathbun)\
**Post date:** [March 16, 2016, 7:15pm UTC](https://forums.sketchup.com/t/sketchup-2016-make-with-openstudio-crashes/22161/2 "2016-03-16T19:15:31Z")

</div>

Does it happen when you switch off the **OpenStudio** extension ?

---

<div class="post-metadata">

**Author:** ![Ram5931](https://avatars.discourse-cdn.com/v4/letter/r/ecc23a/32.png) [@Ram5931](https://forums.sketchup.com/u/Ram5931)\
**Post date:** [March 16, 2016, 7:45pm UTC](https://forums.sketchup.com/t/sketchup-2016-make-with-openstudio-crashes/22161/3 "2016-03-16T19:45:20Z")

</div>

No it doesn’t. But I need the Open Studio plug-ins to complete a task. I was able to get it to work on anther computer though.

---

<div class="post-metadata">

**Author:** ![DanRathbun](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/danrathbun/32/500_2.png) [@DanRathbun](https://forums.sketchup.com/u/DanRathbun)\
**Post date:** [March 16, 2016, 7:48pm UTC](https://forums.sketchup.com/t/sketchup-2016-make-with-openstudio-crashes/22161/4 "2016-03-16T19:48:57Z")

</div>

Okay, so have you updated **SketchUp 2016** to the recent **M1** release ? (You install over the top of the initial **M0** release, BTW.)

---

<div class="post-metadata">

**Author:** ![DanRathbun](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/danrathbun/32/500_2.png) [@DanRathbun](https://forums.sketchup.com/u/DanRathbun)\
**Post date:** [March 16, 2016, 7:53pm UTC](https://forums.sketchup.com/t/sketchup-2016-make-with-openstudio-crashes/22161/5 "2016-03-16T19:53:07Z")

</div>

And have you installed the **OpenStudio v `1.10.0` re-release** (dated 1/25/2016) ?

_Personally_, I do not understand the logic of releasing an important bug fix with the same version number, as the previous bugged release. (It should have been v `1.10.1` at the very least.) This is just bound to cause confusion.

**ADD** : just for **FYI** : There are at this time 633 open bugs.

> **[Issues · NREL/OpenStudio](https://github.com/NREL/OpenStudio/issues?q=is%3Aopen%2Bis%3Aissue)**
>
> OpenStudio is a cross-platform collection of software tools to support whole building energy modeling using EnergyPlus and advanced daylight analysis using Radiance. - Issues · NREL/OpenStudio

… and you might ask your question in the Unmet Hours forum:

> **[Unmet Hours](https://unmethours.com/questions/scope:all/sort:activity-desc/tags:openstudio/)**
>
> A question-and-answer resource for the building energy modeling community.

---

<div class="post-metadata">

**Author:** ![Ram5931](https://avatars.discourse-cdn.com/v4/letter/r/ecc23a/32.png) [@Ram5931](https://forums.sketchup.com/u/Ram5931)\
**Post date:** [March 16, 2016, 8:02pm UTC](https://forums.sketchup.com/t/sketchup-2016-make-with-openstudio-crashes/22161/6 "2016-03-16T20:02:44Z")

</div>

Dan,  
Than you for the suggestion, I’ll give it a try.