# Shape Bender Alternative

**URL:** <https://forums.sketchup.com/t/shape-bender-alternative/223571>\
**Category:** SketchUp\
**Created:** [March 15, 2023, 6:04pm UTC](https://forums.sketchup.com/t/shape-bender-alternative/223571 "2023-03-15T18:04:49Z")\
**Posts on this page:** 17\
**Page:** 1

<div class="post-metadata">

**Author:** ![Puipuii](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/puipuii/32/173796_2.png) [@Puipuii](https://forums.sketchup.com/u/Puipuii)\
**Post date:** [March 15, 2023, 6:04pm UTC](https://forums.sketchup.com/t/shape-bender-alternative/223571/1 "2023-03-15T18:04:49Z")

</div>

Hi can you please help me i have been learning a few things lately and i wanted to make a rectangle (little bit curved) table base .and i use the shape bender tool but does not apply in a closed surface like the circle and all.Can you please tell me the alternative for shape bender that bends all the surfaces.

 ![image](https://global.discourse-cdn.com/sketchup/original/3X/c/9/c9dc8545bae014432055cee0e2e0f20e9ea35760.jpeg)  
I wanted to make the panels like this

---

<div class="post-metadata">

**Author:** ![paul.millet](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/paul.millet/32/236258_2.png) [@paul.millet](https://forums.sketchup.com/u/paul.millet)\
**Post date:** [March 15, 2023, 6:25pm UTC](https://forums.sketchup.com/t/shape-bender-alternative/223571/2 "2023-03-15T18:25:02Z")

</div>

Hello, What if you bend it over half a circle and mirror it ?  
You could also make a component and copy with center point over 360°

---

<div class="post-metadata">

**Author:** ![DaveR](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/daver/32/7601_2.png) [@DaveR](https://forums.sketchup.com/u/DaveR)\
**Post date:** [March 15, 2023, 7:50pm UTC](https://forums.sketchup.com/t/shape-bender-alternative/223571/3 "2023-03-15T19:50:04Z")

</div>

What part of that table are you needing to bend? I’m not seeing anything I would use Shape Bender for on that piece.

---

<div class="post-metadata">

**Author:** ![ateliernab](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/ateliernab/32/198399_2.png) [@ateliernab](https://forums.sketchup.com/u/ateliernab)\
**Post date:** [March 15, 2023, 8:05pm UTC](https://forums.sketchup.com/t/shape-bender-alternative/223571/4 "2023-03-15T20:05:04Z")

</div>

Here is my take on the table legs, no bend tool, just work it out in 2d and pushpull.

 ![Capture d’écran 2023-03-15 à 20.59.38](https://global.discourse-cdn.com/sketchup/original/3X/8/c/8c0630f46986c9d03066720debc2e37157b40225.png)

 ![Capture d’écran 2023-03-15 à 21.01.40](https://global.discourse-cdn.com/sketchup/original/3X/1/b/1bf11ffdfff453eac8ad3fb16da14c14287004a2.png)

 ![Capture d’écran 2023-03-15 à 21.04.16](https://global.discourse-cdn.com/sketchup/original/3X/f/3/f3adac656d31d7b8d27035d3711b7a4ada52b2f8.png)

And I know someone will probably come with an alternative, an extension, a more efficient way but hell, I’m lazy, and it took me what, 5 min? i’m ok wit that 🙂

---

<div class="post-metadata">

**Author:** ![Anssi](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/anssi/32/105_2.png) [@Anssi](https://forums.sketchup.com/u/Anssi)\
**Post date:** [March 15, 2023, 8:19pm UTC](https://forums.sketchup.com/t/shape-bender-alternative/223571/5 "2023-03-15T20:19:46Z")

</div>

> [@Puipuii](#):
>
> Can you please tell me the alternative for shape bender

I like to use Truebend.

---

<div class="post-metadata">

**Author:** ![DaveR](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/daver/32/7601_2.png) [@DaveR](https://forums.sketchup.com/u/DaveR)\
**Post date:** [March 15, 2023, 8:29pm UTC](https://forums.sketchup.com/t/shape-bender-alternative/223571/6 "2023-03-15T20:29:26Z")

</div>

Another option without any extensions. Just Move/Copy and Rotate/Copy.

 ![Screenshot - 3_15_2023 , 3_28_18 PM](https://global.discourse-cdn.com/sketchup/original/3X/0/6/06ec1c610e017d8a208f0196f6632a8728bc6d73.png)

 ![Screenshot - 3_15_2023 , 3_47_19 PM](https://global.discourse-cdn.com/sketchup/original/3X/9/5/956a11e12ad9ac609bab1eb1bb9bb3d905f619b5.png)

---

<div class="post-metadata">

**Author:** ![Puipuii](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/puipuii/32/173796_2.png) [@Puipuii](https://forums.sketchup.com/u/Puipuii)\
**Post date:** [March 16, 2023, 2:38am UTC](https://forums.sketchup.com/t/shape-bender-alternative/223571/7 "2023-03-16T02:38:33Z")

</div>

The panels.I’m new maybe i got it wrong i looked at youtube and i saw someone making it with a shape bender and i tried it too hihi

---

<div class="post-metadata">

**Author:** ![Puipuii](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/puipuii/32/173796_2.png) [@Puipuii](https://forums.sketchup.com/u/Puipuii)\
**Post date:** [March 16, 2023, 2:39am UTC](https://forums.sketchup.com/t/shape-bender-alternative/223571/8 "2023-03-16T02:39:46Z")

</div>

Wow can you please tell me what did you do to make those panels

---

<div class="post-metadata">

**Author:** ![DaveR](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/daver/32/7601_2.png) [@DaveR](https://forums.sketchup.com/u/DaveR)\
**Post date:** [March 16, 2023, 2:43am UTC](https://forums.sketchup.com/t/shape-bender-alternative/223571/9 "2023-03-16T02:43:39Z")

</div>

I drew a half circle and extruded it to make a slat which I made into a component and then I used Move/Copy and Rotate/Copy to make the additional slats.

---

<div class="post-metadata">

**Author:** ![Puipuii](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/puipuii/32/173796_2.png) [@Puipuii](https://forums.sketchup.com/u/Puipuii)\
**Post date:** [March 16, 2023, 2:52am UTC](https://forums.sketchup.com/t/shape-bender-alternative/223571/10 "2023-03-16T02:52:33Z")

</div>

Great Thanks.How do you make the slate i am super new is it by using an arc

---

<div class="post-metadata">

**Author:** ![Puipuii](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/puipuii/32/173796_2.png) [@Puipuii](https://forums.sketchup.com/u/Puipuii)\
**Post date:** [March 16, 2023, 2:52am UTC](https://forums.sketchup.com/t/shape-bender-alternative/223571/11 "2023-03-16T02:52:58Z")

</div>

Thank you so much

---

<div class="post-metadata">

**Author:** ![DaveR](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/daver/32/7601_2.png) [@DaveR](https://forums.sketchup.com/u/DaveR)\
**Post date:** [March 16, 2023, 2:57am UTC](https://forums.sketchup.com/t/shape-bender-alternative/223571/12 "2023-03-16T02:57:02Z")

</div>

I used the Pie tool to make a semicircle.

You should spend some time going through the educational materials at [learn.sketchup.com](http://learn.sketchup.com) and the Square One videos on the SketchUp YouTube channel.

---

<div class="post-metadata">

**Author:** ![Puipuii](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/puipuii/32/173796_2.png) [@Puipuii](https://forums.sketchup.com/u/Puipuii)\
**Post date:** [March 16, 2023, 3:06am UTC](https://forums.sketchup.com/t/shape-bender-alternative/223571/13 "2023-03-16T03:06:03Z")

</div>

Yes But my question was i know how to make the base like the circle and the other one ,I dont know how to make the panels.

Add multiple images

---

<div class="post-metadata">

**Author:** ![TDahl](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/tdahl/32/11584_2.png) [@TDahl](https://forums.sketchup.com/u/TDahl)\
**Post date:** [March 16, 2023, 12:01pm UTC](https://forums.sketchup.com/t/shape-bender-alternative/223571/14 "2023-03-16T12:01:19Z")

</div>

> [@Puipuii](#):
>
> Yes But my question was i know how to make the base like the circle and the other one ,I dont know how to make the panels.

After creating the base shape (half-circle or whatever), then use the Push Pull tool to extrude the 2D base shape into a 3D object. Then select all of the 3D extrusion geometry (e.g., by triple-clicking on one of the faces or surfaces) and make it a Component. Then use the Move/Copy or Rotate/Copy tools to replicate it to form the overall pedestal.

---

<div class="post-metadata">

**Author:** ![Puipuii](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/puipuii/32/173796_2.png) [@Puipuii](https://forums.sketchup.com/u/Puipuii)\
**Post date:** [March 17, 2023, 8:50am UTC](https://forums.sketchup.com/t/shape-bender-alternative/223571/15 "2023-03-17T08:50:31Z")

</div>

Sorry to interrupt but i need to make this today I got the slat correct but how did you put it on the round/circle shapes .I can get it only in a straight line .How did you get it done in the shape you want

---

<div class="post-metadata">

**Author:** ![ateliernab](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/ateliernab/32/198399_2.png) [@ateliernab](https://forums.sketchup.com/u/ateliernab)\
**Post date:** [March 17, 2023, 9:24am UTC](https://forums.sketchup.com/t/shape-bender-alternative/223571/16 "2023-03-17T09:24:14Z")

</div>

you only get it in a straight line because you use the move tool.

Try EXACTLY the same process (pressing the key to make copies & all) but with the rotate tool.  
Rotate and move work the same, they rotate and move, but they can also make copies, and multiply them.

That’s how we did copies along a circle.

---

<div class="post-metadata">

**Author:** ![Puipuii](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/puipuii/32/173796_2.png) [@Puipuii](https://forums.sketchup.com/u/Puipuii)\
**Post date:** [March 17, 2023, 11:51am UTC](https://forums.sketchup.com/t/shape-bender-alternative/223571/17 "2023-03-17T11:51:17Z")

</div>

Got it .Thanks alot.I did it🥰
