# Selection problem. Can select by edges but not face

**URL:** <https://forums.sketchup.com/t/selection-problem-can-select-by-edges-but-not-face/116653>\
**Category:** SketchUp\
**Created:** [February 17, 2020, 4:08pm UTC](https://forums.sketchup.com/t/selection-problem-can-select-by-edges-but-not-face/116653 "2020-02-17T16:08:26Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![Shep](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/shep/32/41669_2.png) [@Shep](https://forums.sketchup.com/u/Shep)\
**Post date:** [February 17, 2020, 4:08pm UTC](https://forums.sketchup.com/t/selection-problem-can-select-by-edges-but-not-face/116653/1 "2020-02-17T16:08:26Z")

</div>

I had this come up over the weekend while fiddling with a barn door.  
The larger part of the door is a group containing the diagonal brace (group) and loose geometry.  
Oh and of course if the group is copied to a new file it works correctly.

 ![Seletion troubles](https://global.discourse-cdn.com/sketchup/original/3X/f/4/f41e95a67df8b9bc28ff88a7d44d68f728b11211.gif)

---

<div class="post-metadata">

**Author:** ![DaveR](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/daver/32/7601_2.png) [@DaveR](https://forums.sketchup.com/u/DaveR)\
**Post date:** [February 17, 2020, 4:11pm UTC](https://forums.sketchup.com/t/selection-problem-can-select-by-edges-but-not-face/116653/2 "2020-02-17T16:11:33Z")

</div>

Weird. Can you share it?

---

<div class="post-metadata">

**Author:** ![MikeWayzovski](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/mikewayzovski/32/98346_2.png) [@MikeWayzovski](https://forums.sketchup.com/u/MikeWayzovski)\
**Post date:** [February 17, 2020, 4:16pm UTC](https://forums.sketchup.com/t/selection-problem-can-select-by-edges-but-not-face/116653/3 "2020-02-17T16:16:27Z")

</div>

zoom in, does it work, then? I have also noticed it sometimes.  
Zeems like fighting!

---

<div class="post-metadata">

**Author:** ![Shep](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/shep/32/41669_2.png) [@Shep](https://forums.sketchup.com/u/Shep)\
**Post date:** [February 17, 2020, 5:15pm UTC](https://forums.sketchup.com/t/selection-problem-can-select-by-edges-but-not-face/116653/4 "2020-02-17T17:15:50Z")

</div>

> [@MikeWayzovski](#):
>
> zoom in, does it work, then? I have also noticed it sometimes.  
> Zeems like fighting!

That seems to be the cause.  
More information, there was a very similar door in the same location but hidden with the eyeball in outliner. I moved that component and it works correctly.  
Once editing that group, I wouldn’t have thought geometry outside the group would be an issue.

Thanks,  
Shep  
The hidden door is on the right  
 ![Two door seedat](https://global.discourse-cdn.com/sketchup/original/3X/8/7/87aed0d081e01a83a18f91f741d4951fd5728d3d.png)

---

<div class="post-metadata">

**Author:** ![Shep](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/shep/32/41669_2.png) [@Shep](https://forums.sketchup.com/u/Shep)\
**Post date:** [February 17, 2020, 5:51pm UTC](https://forums.sketchup.com/t/selection-problem-can-select-by-edges-but-not-face/116653/5 "2020-02-17T17:51:48Z")

</div>

Here’s the file if anyone wants a peek. I removed the hardware since it wasn’t mine.

Shep

[barn doors invisible z fighting.skp](https://forums.sketchup.com/uploads/short-url/ttEWLIyBuKFjm4hit55idgEjXfa.skp) (314.6 KB)

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/sketchup/original/3X/f/2/f2a121500b085ed60806607a82720b092d800bb3.png) [@system](https://forums.sketchup.com/u/system)\
**Post date:** [August 19, 2020, 1:51am UTC](https://forums.sketchup.com/t/selection-problem-can-select-by-edges-but-not-face/116653/6 "2020-08-19T01:51:51Z")

</div>

Closed on August 19, 2020, 1:51am UTC

This topic was automatically closed 183 days after the last reply. New replies are no longer allowed.
