# Section cut extensions

**URL:** <https://forums.sketchup.com/t/section-cut-extensions/341329>\
**Category:** Extensions\
**Created:** [October 22, 2025, 6:55pm UTC](https://forums.sketchup.com/t/section-cut-extensions/341329 "2025-10-22T18:55:03Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![Jackw](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/jackw/32/216723_2.png) [@Jackw](https://forums.sketchup.com/u/Jackw)\
**Post date:** [October 22, 2025, 6:55pm UTC](https://forums.sketchup.com/t/section-cut-extensions/341329/1 "2025-10-22T18:55:03Z")

</div>

![HALF SECTION CUT](https://global.discourse-cdn.com/sketchup/original/3X/7/b/7bb09ee4aac382a46a218a894292a204ecf529dc.png)

 ![OFFSET SECTION CUT](https://global.discourse-cdn.com/sketchup/original/3X/b/1/b1ff2ae82e6144c061b64ee0bb7e90847db20ce2.png)

I wanted to ask if Sketchup has an extension that does half section cuts or offset section cuts like the ones in the photos?

---

<div class="post-metadata">

**Author:** ![mihai.s](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/mihai.s/32/202022_2.png) [@mihai.s](https://forums.sketchup.com/u/mihai.s)\
**Post date:** [October 22, 2025, 7:34pm UTC](https://forums.sketchup.com/t/section-cut-extensions/341329/2 "2025-10-22T19:34:44Z")

</div>

With V-Ray for SketchUp. Then you can combine them in a photo editor.

 ![v-ray](https://global.discourse-cdn.com/sketchup/original/3X/c/5/c51a38603a2250dbf80a6a5c661a7e0d29f93a08.jpeg)

 ![vray-04](https://global.discourse-cdn.com/sketchup/original/3X/5/2/52d836d2e76a5a44f68919317c6b89d2c7da05b5.jpeg)

---

<div class="post-metadata">

**Author:** ![Jackw](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/jackw/32/216723_2.png) [@Jackw](https://forums.sketchup.com/u/Jackw)\
**Post date:** [October 22, 2025, 11:46pm UTC](https://forums.sketchup.com/t/section-cut-extensions/341329/3 "2025-10-22T23:46:25Z")

</div>

Well I guess I was looking for something like an extension that can be made into a scene then transposed into layout for final construction documents.

---

<div class="post-metadata">

**Author:** ![francisquitof](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/francisquitof/32/191263_2.png) [@francisquitof](https://forums.sketchup.com/u/francisquitof)\
**Post date:** [October 23, 2025, 1:59am UTC](https://forums.sketchup.com/t/section-cut-extensions/341329/4 "2025-10-23T01:59:38Z")

</div>

I’ve requested this in the past, the only solution I’ve found is make multiple scenes showing the different sections and on layout align the viewports to make it look like a jogged section.

---

<div class="post-metadata">

**Author:** ![3DxJFD](https://avatars.discourse-cdn.com/v4/letter/3/f07891/32.png) [@3DxJFD](https://forums.sketchup.com/u/3DxJFD)\
**Post date:** [October 23, 2025, 2:01am UTC](https://forums.sketchup.com/t/section-cut-extensions/341329/5 "2025-10-23T02:01:31Z")

</div>

The extension in this post might fit the bill: [SJ SectionBox - Extensions - SketchUp Community](https://forums.sketchup.com/t/sj-sectionbox/306336)

---

<div class="post-metadata">

**Author:** ![bifterx](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/bifterx/32/44878_2.png) [@bifterx](https://forums.sketchup.com/u/bifterx)\
**Post date:** [October 23, 2025, 1:05pm UTC](https://forums.sketchup.com/t/section-cut-extensions/341329/6 "2025-10-23T13:05:45Z")

</div>

yes, this is the only way I believe

---

<div class="post-metadata">

**Author:** ![TIG](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/tig/32/198_2.png) [@TIG](https://forums.sketchup.com/u/TIG)\
**Post date:** [October 23, 2025, 2:51pm UTC](https://forums.sketchup.com/t/section-cut-extensions/341329/7 "2025-10-23T14:51:31Z")

</div>

If the model is simple and asolid, make a grouped copy of the part you wish to cut ‘jaggedly’, off to one side and perhaps with a separate tag. Now make a grouped ’cutting-block’ volume that follows the cut-path desired and place it over the main copy. Use the subtract tool to cut the copy and you should get the desired result - color the ‘cut’ faces as desired…
