# Scale slightly off

**URL:** <https://forums.sketchup.com/t/scale-slightly-off/286775>\
**Category:** LayOut\
**Tags:** export\
**Created:** [August 22, 2024, 5:15pm UTC](https://forums.sketchup.com/t/scale-slightly-off/286775 "2024-08-22T17:15:11Z")\
**Posts on this page:** 18\
**Page:** 1

<div class="post-metadata">

**Author:** ![jbilley](https://avatars.discourse-cdn.com/v4/letter/j/57b2e6/32.png) [@jbilley](https://forums.sketchup.com/u/jbilley)\
**Post date:** [August 22, 2024, 5:15pm UTC](https://forums.sketchup.com/t/scale-slightly-off/286775/1 "2024-08-22T17:15:11Z")

</div>

I noticed on a recent project I worked on in layout that the set of drawings were ‘out of scale’ once I exported them to pdf. It is about a 4% increase in the scale. It is not a big issue, as most users will not ever put a scale ruler to the drawings. However, if I was to import that document into a graphic program such as illustrator, then the artwork would be ‘out of scale’ by +4%. Has anyone come across this issue and has anyone found a work around?

---

<div class="post-metadata">

**Author:** ![kevin58](https://avatars.discourse-cdn.com/v4/letter/k/51bf81/32.png) [@kevin58](https://forums.sketchup.com/u/kevin58)\
**Post date:** [August 22, 2024, 5:27pm UTC](https://forums.sketchup.com/t/scale-slightly-off/286775/2 "2024-08-22T17:27:43Z")

</div>

Until I read your post I had never checked the accuracy of a printed pdf so …

I just drew a 1000 x 1000 rectangle in SketchUp, drew it up in Layout at a scale of 1:5 and printed it out at A3 and it comes out pretty well bang on at 200 x 200.

Just maybe?? 199.9 x 200 so still within 0.05 percent.

Can you share your Layout file?

---

<div class="post-metadata">

**Author:** ![DaveR](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/daver/32/7601_2.png) [@DaveR](https://forums.sketchup.com/u/DaveR)\
**Post date:** [August 22, 2024, 5:47pm UTC](https://forums.sketchup.com/t/scale-slightly-off/286775/3 "2024-08-22T17:47:15Z")

</div>

Are they “out of scale” when you print them? What are your print settings?

 ![Screenshot - 8_22_2024 , 12_46_26 PM](https://global.discourse-cdn.com/sketchup/original/3X/1/e/1e44dcfdccae5f403c3b25f7ff114054a9821cdd.png)

---

<div class="post-metadata">

**Author:** ![ArchyVR](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/archyvr/32/182009_2.png) [@ArchyVR](https://forums.sketchup.com/u/ArchyVR)\
**Post date:** [August 22, 2024, 5:52pm UTC](https://forums.sketchup.com/t/scale-slightly-off/286775/4 "2024-08-22T17:52:25Z")

</div>

I have not run into this either.

Besides using SU&LO for architecture, I occasionally use SU with 3D printing and its spot on.

I also occasionally use LO for laser engraving/cutting as well as paper cutting and it’s always been spot on.

Please share a LO&SU file that exhibits this behavior to see if we can spot whats going on.

---

<div class="post-metadata">

**Author:** ![jbilley](https://avatars.discourse-cdn.com/v4/letter/j/57b2e6/32.png) [@jbilley](https://forums.sketchup.com/u/jbilley)\
**Post date:** [August 22, 2024, 6:00pm UTC](https://forums.sketchup.com/t/scale-slightly-off/286775/5 "2024-08-22T18:00:50Z")

</div>

Both. The file is out when printed as well as when I open the pdf up in illustrator. It has nothing to do with print settings,  
as those are always set so that they are at ‘actual size’ (100%)

---

<div class="post-metadata">

**Author:** ![Anssi](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/anssi/32/105_2.png) [@Anssi](https://forums.sketchup.com/u/Anssi)\
**Post date:** [August 22, 2024, 6:06pm UTC](https://forums.sketchup.com/t/scale-slightly-off/286775/6 "2024-08-22T18:06:33Z")

</div>

Sounds really odd. The most common error is to use the “fit to page” setting when printing but that generally shrinks the result. Can you post a LayOut file that displays this behaviour? Does the scaling apply both to inserted SketchUp views and items on your LO page? Are your SketchUp views using a Perspective camera?

---

<div class="post-metadata">

**Author:** ![DaveR](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/daver/32/7601_2.png) [@DaveR](https://forums.sketchup.com/u/DaveR)\
**Post date:** [August 22, 2024, 6:06pm UTC](https://forums.sketchup.com/t/scale-slightly-off/286775/7 "2024-08-22T18:06:38Z")

</div>

> [@jbilley](#):
>
> as those are always set so that they are at ‘actual size’ (100%)

That’s all I was asking.

I haven’t run into scaling issues with any PDFs I’ve printed that came from LayOut so I’m just asking to see what might be afactors for you.

---

<div class="post-metadata">

**Author:** ![jbilley](https://avatars.discourse-cdn.com/v4/letter/j/57b2e6/32.png) [@jbilley](https://forums.sketchup.com/u/jbilley)\
**Post date:** [August 22, 2024, 6:09pm UTC](https://forums.sketchup.com/t/scale-slightly-off/286775/8 "2024-08-22T18:09:53Z")

</div>

[24055485 Le Reve Pylons\_FINAL.pdf](https://forums.sketchup.com/uploads/short-url/8bwa4gSs6sPpMGtkn6V0iBDm1Co.pdf) (9.8 MB)  
[Le Reve Monument-FABRICATION 3.pdf](https://forums.sketchup.com/uploads/short-url/Aia9HhNXkRWweGN4qcIZWXefYnO.pdf) (1.5 MB)

---

<div class="post-metadata">

**Author:** ![kevin58](https://avatars.discourse-cdn.com/v4/letter/k/51bf81/32.png) [@kevin58](https://forums.sketchup.com/u/kevin58)\
**Post date:** [August 22, 2024, 6:20pm UTC](https://forums.sketchup.com/t/scale-slightly-off/286775/9 "2024-08-22T18:20:00Z")

</div>

You seem to have them set to ‘Fit to Printable Area’.

When I change that to ‘Print Actual Size’ they are spot on 👍

 ![Screen Shhot](https://global.discourse-cdn.com/sketchup/original/3X/9/3/93bf375796bdd0e762018c80984dce0c696a7033.png)

---

<div class="post-metadata">

**Author:** ![jbilley](https://avatars.discourse-cdn.com/v4/letter/j/57b2e6/32.png) [@jbilley](https://forums.sketchup.com/u/jbilley)\
**Post date:** [August 22, 2024, 6:21pm UTC](https://forums.sketchup.com/t/scale-slightly-off/286775/10 "2024-08-22T18:21:28Z")

</div>

open both up in a graphics program such as ai, and you will see the differences.

---

<div class="post-metadata">

**Author:** ![jbilley](https://avatars.discourse-cdn.com/v4/letter/j/57b2e6/32.png) [@jbilley](https://forums.sketchup.com/u/jbilley)\
**Post date:** [August 22, 2024, 6:24pm UTC](https://forums.sketchup.com/t/scale-slightly-off/286775/11 "2024-08-22T18:24:53Z")

</div>

Thanks Kevin, but this has nothing to do with how they print out. The objects in the file will not import/open into a graphics program at the proper scale. One will, which is the artwork in color and the other won’t.

---

<div class="post-metadata">

**Author:** ![kevin58](https://avatars.discourse-cdn.com/v4/letter/k/51bf81/32.png) [@kevin58](https://forums.sketchup.com/u/kevin58)\
**Post date:** [August 22, 2024, 6:28pm UTC](https://forums.sketchup.com/t/scale-slightly-off/286775/12 "2024-08-22T18:28:10Z")

</div>

Ah - okay.

I thought you meant they were incorrect after exporting from Layout to PDF then printing the PDF.

Best of luck with it.

---

<div class="post-metadata">

**Author:** ![ArchyVR](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/archyvr/32/182009_2.png) [@ArchyVR](https://forums.sketchup.com/u/ArchyVR)\
**Post date:** [August 22, 2024, 6:35pm UTC](https://forums.sketchup.com/t/scale-slightly-off/286775/13 "2024-08-22T18:35:10Z")

</div>

If you Print to Adobe PDF instead of Export to PDF using LO native exporter,

There is a Scaling option under Preferences → Layout → Advanced

![image](https://global.discourse-cdn.com/sketchup/original/3X/8/4/8408760ffab0227cf062ef4b6672506fa9891d3a.png)

Make sure that is set to 100.

---

<div class="post-metadata">

**Author:** ![ArchyVR](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/archyvr/32/182009_2.png) [@ArchyVR](https://forums.sketchup.com/u/ArchyVR)\
**Post date:** [August 22, 2024, 6:39pm UTC](https://forums.sketchup.com/t/scale-slightly-off/286775/14 "2024-08-22T18:39:35Z")

</div>

Did you double check the SU window scale in LO is set correctly?

![image](https://global.discourse-cdn.com/sketchup/original/3X/2/3/23fb438636c5d0f77e2a0c01bf64553ec155e8bf.png)

---

<div class="post-metadata">

**Author:** ![jbilley](https://avatars.discourse-cdn.com/v4/letter/j/57b2e6/32.png) [@jbilley](https://forums.sketchup.com/u/jbilley)\
**Post date:** [August 22, 2024, 6:57pm UTC](https://forums.sketchup.com/t/scale-slightly-off/286775/15 "2024-08-22T18:57:56Z")

</div>

Well, now that is just embarrassing. It seems that I labeled the scale incorrectly on the drawings. The scale is 1/4"=12" on the model instance, but the scale on the drawing reads 1:50. There is my 4% increase in size. 😬 😬 😖 😒

---

<div class="post-metadata">

**Author:** ![ArchyVR](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/archyvr/32/182009_2.png) [@ArchyVR](https://forums.sketchup.com/u/ArchyVR)\
**Post date:** [August 22, 2024, 7:05pm UTC](https://forums.sketchup.com/t/scale-slightly-off/286775/16 "2024-08-22T19:05:54Z")

</div>

Glad we got to the bottom of it. 🙂

---

<div class="post-metadata">

**Author:** ![jbilley](https://avatars.discourse-cdn.com/v4/letter/j/57b2e6/32.png) [@jbilley](https://forums.sketchup.com/u/jbilley)\
**Post date:** [August 22, 2024, 7:07pm UTC](https://forums.sketchup.com/t/scale-slightly-off/286775/17 "2024-08-22T19:07:00Z")

</div>

So am I. For a minute there, I thought I was going crazy (short trip anyway).

---

<div class="post-metadata">

**Author:** ![ivanjones](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/ivanjones/32/137637_2.png) [@ivanjones](https://forums.sketchup.com/u/ivanjones)\
**Post date:** [August 23, 2024, 2:23am UTC](https://forums.sketchup.com/t/scale-slightly-off/286775/18 "2024-08-23T02:23:08Z")

</div>

I was thinking it was the exchange rate to Canada! 🤣
