# Rails with curves

**URL:** <https://forums.sketchup.com/t/rails-with-curves/18508>\
**Category:** Pro\
**Created:** [December 13, 2015, 6:31pm UTC](https://forums.sketchup.com/t/rails-with-curves/18508 "2015-12-13T18:31:44Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![ado](https://avatars.discourse-cdn.com/v4/letter/a/b782af/32.png) [@ado](https://forums.sketchup.com/u/ado)\
**Post date:** [December 13, 2015, 6:31pm UTC](https://forums.sketchup.com/t/rails-with-curves/18508/1 "2015-12-13T18:31:44Z")

</div>

Would you please assist me to recreate the rail in the bottom pic. It is has got round edges/corners and bends where it is all welded to the fence but so far I was not able to come up with a technique to recreate anything similar. I have designed the support structre , however I want to replicate the top that has got the design and tried with follow me but so far without any satisfying results.  
Could you please assist me ?

 ![](https://global.discourse-cdn.com/sketchup/original/2X/0/0483254dc9bb9b268c035ea52f437d0ae1b8ab2c.jpg)

---

<div class="post-metadata">

**Author:** ![DaveR](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/daver/32/7601_2.png) [@DaveR](https://forums.sketchup.com/u/DaveR)\
**Post date:** [December 13, 2015, 6:33pm UTC](https://forums.sketchup.com/t/rails-with-curves/18508/2 "2015-12-13T18:33:22Z")

</div>

I would use Follow Me to create the rail and then cut the end off with a intersection operation. Hang tight and I’ll draw an example.

---

<div class="post-metadata">

**Author:** ![Gully\_Foyle](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/gully_foyle/32/124_2.png) [@Gully\_Foyle](https://forums.sketchup.com/u/Gully_Foyle)\
**Post date:** [December 13, 2015, 6:56pm UTC](https://forums.sketchup.com/t/rails-with-curves/18508/3 "2015-12-13T18:56:47Z")

</div>

Here’s an example of DaveR’s method. Use the Intersect command to cut the half circle on the bottom.

![](https://global.discourse-cdn.com/sketchup/original/2X/a/a00de440d8c6ea8d871cd8a0838cdc6ac2934a18.png)

-Gully

---

<div class="post-metadata">

**Author:** ![DaveR](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/daver/32/7601_2.png) [@DaveR](https://forums.sketchup.com/u/DaveR)\
**Post date:** [December 13, 2015, 6:57pm UTC](https://forums.sketchup.com/t/rails-with-curves/18508/4 "2015-12-13T18:57:46Z")

</div>

![](https://global.discourse-cdn.com/sketchup/original/2X/2/26c1a00bd4797be1b60365753ae2b28303c6c711.png)

From left to right.  
Draw the profile of the rail and a path for it to follow.  
Select the path, get the Follow Me tool and click on the profile.  
Draw a “cutter” and use it to intersect with the end.  
Make the intersection and delete the waste.

And Gully is faster.

---

<div class="post-metadata">

**Author:** ![Gully\_Foyle](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/gully_foyle/32/124_2.png) [@Gully\_Foyle](https://forums.sketchup.com/u/Gully_Foyle)\
**Post date:** [December 13, 2015, 6:59pm UTC](https://forums.sketchup.com/t/rails-with-curves/18508/5 "2015-12-13T18:59:04Z")

</div>

> [@DaveR](#):
>
> And Gully is faster.

Usually not.

-G

---

<div class="post-metadata">

**Author:** ![colin](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/colin/32/266703_2.png) [@colin](https://forums.sketchup.com/u/colin)\
**Post date:** [December 13, 2015, 7:17pm UTC](https://forums.sketchup.com/t/rails-with-curves/18508/6 "2015-12-13T19:17:05Z")

</div>

If you solved the problem with scripting in SketchUp, would that be Ruby on Rails?

---

<div class="post-metadata">

**Author:** ![ado](https://avatars.discourse-cdn.com/v4/letter/a/b782af/32.png) [@ado](https://forums.sketchup.com/u/ado)\
**Post date:** [December 13, 2015, 9:40pm UTC](https://forums.sketchup.com/t/rails-with-curves/18508/7 "2015-12-13T21:40:36Z")

</div>

Thanks so much. This has really been helpful.
