# Question about creating a pad along the pipe plane

**URL:** <https://forums.sketchup.com/t/question-about-creating-a-pad-along-the-pipe-plane/351356>\
**Category:** Pro\
**Created:** [November 7, 2026, 2:28am UTC](https://forums.sketchup.com/t/question-about-creating-a-pad-along-the-pipe-plane/351356 "2026-11-07T02:28:55Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![jedsalid.n](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/jedsalid.n/32/149310_2.png) [@jedsalid.n](https://forums.sketchup.com/u/jedsalid.n)\
**Post date:** [November 7, 2026, 2:28am UTC](https://forums.sketchup.com/t/question-about-creating-a-pad-along-the-pipe-plane/351356/1 "2026-11-07T02:28:55Z")

</div>

Hello

I have a question and would appreciate your help.

I would like to create a pad that follows the same plane as the main pipe. My idea is to offset the branch pipe line by 200 mm, but I haven’t been able to achieve this using the standard tools.

Could you please advise me on how to do this or suggest an alternative method?

pipe main 24" , pipe branch 16"

Thank you very much for your help.

 ![cea682af-1d8c-4c24-9943-a48dcdcfedf1](https://global.discourse-cdn.com/sketchup/original/4X/3/f/3/3f3cf7057ca0618871626cef6319a3f5a0f7ee24.png)

 ![22b98064-ed4b-4178-9312-7630735c1408](https://global.discourse-cdn.com/sketchup/original/4X/4/e/6/4e6c88600b6d9c6d04be05e38ab8d246c6e4d095.png)

---

<div class="post-metadata">

**Author:** ![DaveR](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/daver/32/7601_2.png) [@DaveR](https://forums.sketchup.com/u/DaveR)\
**Post date:** [November 7, 2026, 2:45am UTC](https://forums.sketchup.com/t/question-about-creating-a-pad-along-the-pipe-plane/351356/2 "2026-11-07T02:45:12Z")

</div>

Something like this?

 ![Screenshot - 11_6_2026 , 8_41_33 PM](https://global.discourse-cdn.com/sketchup/original/4X/b/7/a/b7ace90a7e05badde3225b362ac3f33d68d390d8.png)  
This is very rough as a quick example. I used Intersect Faces between the main and the branch. Then I used Offset of Surface from the Tools on Surface extension to outline the pad. Joint Push/Pull to give the pad thickness. If I was seriously modeling this I would use more sides in the circles for the two pipes to get smoother edges for the pads.

 ![Screenshot - 11_6_2026 , 8_55_14 PM](https://global.discourse-cdn.com/sketchup/original/4X/d/8/d/d8dbd4fb2818324c4ee03cc6a0834fec8de4c64f.png)

---

<div class="post-metadata">

**Author:** ![jedsalid.n](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/jedsalid.n/32/149310_2.png) [@jedsalid.n](https://forums.sketchup.com/u/jedsalid.n)\
**Post date:** [November 7, 2026, 3:01am UTC](https://forums.sketchup.com/t/question-about-creating-a-pad-along-the-pipe-plane/351356/3 "2026-11-07T03:01:15Z")

</div>

Could you please make a short video clip demonstrating the process so I can better understand the workflow? I would really appreciate it. Thank you.

---

<div class="post-metadata">

**Author:** ![DaveR](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/daver/32/7601_2.png) [@DaveR](https://forums.sketchup.com/u/DaveR)\
**Post date:** [November 7, 2026, 3:29am UTC](https://forums.sketchup.com/t/question-about-creating-a-pad-along-the-pipe-plane/351356/4 "2026-11-07T03:29:13Z")

</div>

Here’s a method that doesn’t require Tools on Surface. In this case I made the pad as a separate component so it can be easily copied to other pipes. In the interest of time I didn’t spend any time on real dimensions.

---

<div class="post-metadata">

**Author:** ![jedsalid.n](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/jedsalid.n/32/149310_2.png) [@jedsalid.n](https://forums.sketchup.com/u/jedsalid.n)\
**Post date:** [November 7, 2026, 3:38am UTC](https://forums.sketchup.com/t/question-about-creating-a-pad-along-the-pipe-plane/351356/5 "2026-11-07T03:38:53Z")

</div>

Thank you very much. There’s no need to make the video clip anymore. I was able to follow your instructions successfully. I really appreciate your help and guidance. Thanks again!

---

<div class="post-metadata">

**Author:** ![jedsalid.n](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/jedsalid.n/32/149310_2.png) [@jedsalid.n](https://forums.sketchup.com/u/jedsalid.n)\
**Post date:** [November 7, 2026, 3:43am UTC](https://forums.sketchup.com/t/question-about-creating-a-pad-along-the-pipe-plane/351356/6 "2026-11-07T03:43:11Z")

</div>

Thank you very much for taking the time to explain the process and create the video clips for me. Your guidance was extremely helpful, and I really appreciate your kindness and willingness to share your knowledge. Thank you again for your support!

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/sketchup/original/3X/f/2/f2a121500b085ed60806607a82720b092d800bb3.png) [@system](https://forums.sketchup.com/u/system)\
**Post date:** [November 14, 2026, 3:43am UTC](https://forums.sketchup.com/t/question-about-creating-a-pad-along-the-pipe-plane/351356/8 "2026-11-14T03:43:36Z")

</div>

Closed on November 14, 2026, 3:43am UTC

This topic was automatically closed 7 days after the last reply. New replies are no longer allowed.
