# Push/Pull angled face

**URL:** <https://forums.sketchup.com/t/push-pull-angled-face/34524>\
**Category:** SketchUp\
**Created:** [November 22, 2016, 10:02pm UTC](https://forums.sketchup.com/t/push-pull-angled-face/34524 "2016-11-22T22:02:40Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![arhude](https://avatars.discourse-cdn.com/v4/letter/a/edb3f5/32.png) [@arhude](https://forums.sketchup.com/u/arhude)\
**Post date:** [November 22, 2016, 10:02pm UTC](https://forums.sketchup.com/t/push-pull-angled-face/34524/1 "2016-11-22T22:02:40Z")

</div>

I want to do something very simple but can’t figure it out. I use Push/pull all the time but it doesn’t work in this case. Let’s say I make a 2x4 piece of wood. If it has a square-cut end, I can extrude that to make the board longer or shorter. But if it has an angle-cut end, I can not lengthen or shorten that 2x4. Push/pull extrudes the angled face perpendicular to the face, not along the length of the board. Follow me doesn’t work either because the face has to be perpendicular to the path. I would think this would be something simple and I need to use it all the time but haven’t been able to.

---

<div class="post-metadata">

**Author:** ![Box](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/box/32/235164_2.png) [@Box](https://forums.sketchup.com/u/Box)\
**Post date:** [November 22, 2016, 10:05pm UTC](https://forums.sketchup.com/t/push-pull-angled-face/34524/2 "2016-11-22T22:05:03Z")

</div>

Select the angled face and use the move tool.

---

<div class="post-metadata">

**Author:** ![arhude](https://avatars.discourse-cdn.com/v4/letter/a/edb3f5/32.png) [@arhude](https://forums.sketchup.com/u/arhude)\
**Post date:** [November 22, 2016, 10:07pm UTC](https://forums.sketchup.com/t/push-pull-angled-face/34524/3 "2016-11-22T22:07:01Z")

</div>

Gosh, I knew it had to be something simple! Thanks. I never even thought of that.

---

<div class="post-metadata">

**Author:** ![arhude](https://avatars.discourse-cdn.com/v4/letter/a/edb3f5/32.png) [@arhude](https://forums.sketchup.com/u/arhude)\
**Post date:** [November 22, 2016, 11:23pm UTC](https://forums.sketchup.com/t/push-pull-angled-face/34524/4 "2016-11-22T23:23:20Z")

</div>

I just tried it and remembered - I had done that before a long time ago but the problem is, the part moves around as you move that one face. It’s not a big deal if the part is by itself - it’s fairly easy to keep it oriented the same, but if there are other parts around, it’s more difficult to keep it in the same space. Any way to guarantee it doesn’t move, except for the face in question?

---

<div class="post-metadata">

**Author:** ![DaveR](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/daver/32/7601_2.png) [@DaveR](https://forums.sketchup.com/u/DaveR)\
**Post date:** [November 22, 2016, 11:26pm UTC](https://forums.sketchup.com/t/push-pull-angled-face/34524/5 "2016-11-22T23:26:33Z")

</div>

Only the selection should be moving. You could be distorting attached geometry if you aren’t moving the selection in the right direction. If it’s not being moved on axis, follow an edge or a guideline to prevent you from going off in the wrong direction.

---

<div class="post-metadata">

**Author:** ![arhude](https://avatars.discourse-cdn.com/v4/letter/a/edb3f5/32.png) [@arhude](https://forums.sketchup.com/u/arhude)\
**Post date:** [November 22, 2016, 11:28pm UTC](https://forums.sketchup.com/t/push-pull-angled-face/34524/6 "2016-11-22T23:28:15Z")

</div>

I guess that’s the key. I drew a guide and it worked great. Thanks.

---

<div class="post-metadata">

**Author:** ![Box](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/box/32/235164_2.png) [@Box](https://forums.sketchup.com/u/Box)\
**Post date:** [November 22, 2016, 11:37pm UTC](https://forums.sketchup.com/t/push-pull-angled-face/34524/7 "2016-11-22T23:37:36Z")

</div>

One thing to remember, you don’t need to be touching the face you want to move, so in some cases it is easiest to select it then move along an edges to control it’s direction.  
You can also use the arrow keys to constrain the move on a specific axes.  
Here I have it the up arrow and it has locked to the blue.  
 ![](https://global.discourse-cdn.com/sketchup/original/3X/d/a/da9cb159a164385b35f5d294918853452efd29ed.gif)

---

<div class="post-metadata">

**Author:** ![arhude](https://avatars.discourse-cdn.com/v4/letter/a/edb3f5/32.png) [@arhude](https://forums.sketchup.com/u/arhude)\
**Post date:** [November 22, 2016, 11:54pm UTC](https://forums.sketchup.com/t/push-pull-angled-face/34524/8 "2016-11-22T23:54:20Z")

</div>

Yes, thanks, I do use the constraints when it aligns with an axis but often it doesn’t. I haven’t tried grabbing along an edge like that - thank you for the gif.
