# Push and Pull Problem

**URL:** <https://forums.sketchup.com/t/push-and-pull-problem/17084>\
**Category:** Pro\
**Created:** [November 3, 2015, 7:38pm UTC](https://forums.sketchup.com/t/push-and-pull-problem/17084 "2015-11-03T19:38:26Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Benc10](https://avatars.discourse-cdn.com/v4/letter/b/c2a13f/32.png) [@Benc10](https://forums.sketchup.com/u/Benc10)\
**Post date:** [November 3, 2015, 7:38pm UTC](https://forums.sketchup.com/t/push-and-pull-problem/17084/1 "2015-11-03T19:38:26Z")

</div>

Hi all, Been using sketchup pro and liking it 😄

But designing a table and come to put the top onto the base and the push and pull seems to have holes where the rails come through the top! I put a rectangle from all four corners then used the push and pull tool and seems to do this i have attached screenshots.

Hope someone can help.

Thanks  
Ben

 ![](https://global.discourse-cdn.com/sketchup/original/2X/3/3af6b08349354f94c14196ec9d7ae4d703a9d340.png)

 ![](https://global.discourse-cdn.com/sketchup/original/2X/6/695a540e03bc61123dc9d61dd361ec005694eba6.png)

---

<div class="post-metadata">

**Author:** ![DaveR](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/daver/32/7601_2.png) [@DaveR](https://forums.sketchup.com/u/DaveR)\
**Post date:** [November 3, 2015, 8:23pm UTC](https://forums.sketchup.com/t/push-and-pull-problem/17084/2 "2015-11-03T20:23:36Z")

</div>

You need to create components or groups to keep the parts separate. Then you’ll be able to pull the top up without holes.

You might take a few moments to watch the videos at the following links. they are kind of old but you should get the idea.  
[http://www.finewoodworking.com/item/105391/drawing-a-shop-cabinet-in-sketchup-part-i](http://www.finewoodworking.com/item/105391/drawing-a-shop-cabinet-in-sketchup-part-i)

> **[Jefferson's Bookstand - Another Workflow Example - FineWoodworking](https://www.finewoodworking.com/2010/02/14/jeffersons-bookstand-another-workflow-example)**
>
>   There are a lot of ways to approach drawing a model in SketchUp. I think most users develop a work flow that works for them. Recently I've spoken with several woodworkers who have told me...

---

<div class="post-metadata">

**Author:** ![juleswf1](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/juleswf1/32/14802_2.png) [@juleswf1](https://forums.sketchup.com/u/juleswf1)\
**Post date:** [November 4, 2015, 11:56pm UTC](https://forums.sketchup.com/t/push-and-pull-problem/17084/3 "2015-11-04T23:56:21Z")

</div>

You can also “heal” those holes by retracing one edge on each. Erase the extra lines, and you’ll have one surface to pull up again.
