# Pro 2017 Crashes upon component creation

**URL:** <https://forums.sketchup.com/t/pro-2017-crashes-upon-component-creation/44522>\
**Category:** SketchUp\
**Tags:** crash, installation, components, runasadministrator, reinstall\
**Created:** [May 11, 2017, 3:58am UTC](https://forums.sketchup.com/t/pro-2017-crashes-upon-component-creation/44522 "2017-05-11T03:58:32Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![Ardbeg](https://avatars.discourse-cdn.com/v4/letter/a/58f4c7/32.png) [@Ardbeg](https://forums.sketchup.com/u/Ardbeg)\
**Post date:** [May 11, 2017, 3:58am UTC](https://forums.sketchup.com/t/pro-2017-crashes-upon-component-creation/44522/1 "2017-05-11T03:58:32Z")

</div>

Just paid for upgrade to Pro 2017. Running Windows 10 Pro. Intel i7 860 2.8GHz with Dual AMD Radeon HD5700 cards and 20GB Ram. Any time I attempt to create a component, no matter how simple it is, the program locks up (Not responding) . Tested various normal scenarios and have had no success. So far I can’t comment on anything further because I use components for everything. Back to 2014?? New graphics card? Throw the PC away?

Thanks for your help. I hope.

---

<div class="post-metadata">

**Author:** ![MobelDesign](https://avatars.discourse-cdn.com/v4/letter/m/9e8a1a/32.png) [@MobelDesign](https://forums.sketchup.com/u/MobelDesign)\
**Post date:** [May 11, 2017, 4:02am UTC](https://forums.sketchup.com/t/pro-2017-crashes-upon-component-creation/44522/2 "2017-05-11T04:02:08Z")

</div>

I’m not an expert with such things, but I’ve noticed posts about trouble with SU2017 when users didn’t install using Run as Administrator. You can read about the importance here:

> [@Why the installer must be "run as administrator"](https://forums.sketchup.com/t/why-the-installer-must-be-run-as-administrator/38759):
>
> Since the release of SU 2017, there has been a tidal wave of posts from people who encountered problems with SU because they did not install it properly on Windows. The only correct way is to right-click the installer and select “Run as Administrator”. It is not enough to be logged on as an adminstrator. This requirement (which is not unique to SketchUp) is because modern OS’s have upped their security requirements to protect against malicious code that tries to modify crucial system areas su…

No idea if this is connected with what you’re experiencing; just a thought…

---

<div class="post-metadata">

**Author:** ![Ardbeg](https://avatars.discourse-cdn.com/v4/letter/a/58f4c7/32.png) [@Ardbeg](https://forums.sketchup.com/u/Ardbeg)\
**Post date:** [May 11, 2017, 3:37pm UTC](https://forums.sketchup.com/t/pro-2017-crashes-upon-component-creation/44522/3 "2017-05-11T15:37:13Z")

</div>

Thanks Very Much. This fixed the problem. I ran the set up as administrator and selected to repair. Tested various components and now it’s working as expected.

Cheers!

---

<div class="post-metadata">

**Author:** ![fivebythree](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/fivebythree/32/208457_2.png) [@fivebythree](https://forums.sketchup.com/u/fivebythree)\
**Post date:** [May 11, 2017, 3:57pm UTC](https://forums.sketchup.com/t/pro-2017-crashes-upon-component-creation/44522/4 "2017-05-11T15:57:16Z")

</div>

Alternatively, if you run into this problem again. Group items first then create component. Save often. Etc etc.

---

<div class="post-metadata">

**Author:** ![Ardbeg](https://avatars.discourse-cdn.com/v4/letter/a/58f4c7/32.png) [@Ardbeg](https://forums.sketchup.com/u/Ardbeg)\
**Post date:** [May 23, 2017, 2:56am UTC](https://forums.sketchup.com/t/pro-2017-crashes-upon-component-creation/44522/5 "2017-05-23T02:56:02Z")

</div>

Well I thought this was working. In fact I tested it. after re installation as Admin. Problem is back again. Can’t make components. Grouping first doesn’t help. Program crashes every time I try and “Make Component”. Brutal!

---

<div class="post-metadata">

**Author:** ![eneroth3](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/eneroth3/32/1222_2.png) [@eneroth3](https://forums.sketchup.com/u/eneroth3)\
**Post date:** [May 23, 2017, 9:50am UTC](https://forums.sketchup.com/t/pro-2017-crashes-upon-component-creation/44522/6 "2017-05-23T09:50:36Z")

</div>

Do you have any plugins installed? This might be related to a plugin using an observer to detect component creation.

---

<div class="post-metadata">

**Author:** ![Ardbeg](https://avatars.discourse-cdn.com/v4/letter/a/58f4c7/32.png) [@Ardbeg](https://forums.sketchup.com/u/Ardbeg)\
**Post date:** [May 23, 2017, 12:25pm UTC](https://forums.sketchup.com/t/pro-2017-crashes-upon-component-creation/44522/7 "2017-05-23T12:25:28Z")

</div>

Not on 2017 version. I have some but only on v2014. Thanks.

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/sketchup/original/3X/f/2/f2a121500b085ed60806607a82720b092d800bb3.png) [@system](https://forums.sketchup.com/u/system)\
**Post date:** [August 23, 2017, 4:25am UTC](https://forums.sketchup.com/t/pro-2017-crashes-upon-component-creation/44522/8 "2017-08-23T04:25:49Z")

</div>

Closed on August 23, 2017, 4:25am UTC

This topic was automatically closed 91 days after the last reply. New replies are no longer allowed.
