# New to this

**URL:** <https://forums.sketchup.com/t/new-to-this/102131>\
**Category:** 3D Printing\
**Created:** [September 1, 2019, 5:35am UTC](https://forums.sketchup.com/t/new-to-this/102131 "2019-09-01T05:35:45Z")\
**Posts on this page:** 18\
**Page:** 1

<div class="post-metadata">

**Author:** ![garry.west](https://avatars.discourse-cdn.com/v4/letter/g/65b543/32.png) [@garry.west](https://forums.sketchup.com/u/garry.west)\
**Post date:** [September 1, 2019, 5:35am UTC](https://forums.sketchup.com/t/new-to-this/102131/1 "2019-09-01T05:35:45Z")

</div>

I’m struggling with this  
everything i draw is full of holes when i bring it in to slic3r  
it looks fine in sketchup  
even amending a design that did open ok in slic3r by increasing the thickness of a part creates a new file file full of holes and gaps in slic3r  
how can i tell if its sketchup or slic3r tha’ts at fault  
my pc is windows 7 and 4g RAM, is that the problem  
any suggestions before I bin the whole idea and sell the printer  
Garry

---

<div class="post-metadata">

**Author:** ![Box](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/box/32/235164_2.png) [@Box](https://forums.sketchup.com/u/Box)\
**Post date:** [September 1, 2019, 5:39am UTC](https://forums.sketchup.com/t/new-to-this/102131/2 "2019-09-01T05:39:37Z")

</div>

If you attach a model that shows these problems we should be able to diagnose what’s going on.

---

<div class="post-metadata">

**Author:** ![TIG](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/tig/32/198_2.png) [@TIG](https://forums.sketchup.com/u/TIG)\
**Post date:** [September 1, 2019, 1:08pm UTC](https://forums.sketchup.com/t/new-to-this/102131/3 "2019-09-01T13:08:31Z")

</div>

As Box says, a model would help us help you.

Maybe it’s a ‘size’ issue.  
If your object has tiny edges these might not get processed successfully - SketchUp thinks that two points within 1/1000" are coincident and skips them !

Alternatively - your object must be a ‘manifold solid’ - so when its grouped what does Entity Info say - if the header doesn’t include the word ‘Solid’ then it’s not suitable for 3d-printing, without some fixing.  
Also even it it is a solid, does it have any ‘reversed faces’ - if so fix them using the context-menu.

There are lots of posts explaining what constitutes a manifold solid, and tips on fixing them…  
e.g. this one: [Whats happening with this model upload to shapeways?](https://forums.sketchup.com/t/whats-happening-with-this-model-upload-to-shapeways/14876)  
Do a forum search…

---

<div class="post-metadata">

**Author:** ![garry.west](https://avatars.discourse-cdn.com/v4/letter/g/65b543/32.png) [@garry.west](https://forums.sketchup.com/u/garry.west)\
**Post date:** [September 2, 2019, 4:30am UTC](https://forums.sketchup.com/t/new-to-this/102131/4 "2019-09-02T04:30:35Z")

</div>

[tipperchassis top.skp](https://forums.sketchup.com/uploads/short-url/dCodasvr87wIft1xvsaJOTtErcn.skp) (257.0 KB)  
but in slic3r it looks like this

 ![image](https://global.discourse-cdn.com/sketchup/original/3X/5/f/5fc6ab772a75f2da0d9df7270cf535c62faa00ea.png)

---

<div class="post-metadata">

**Author:** ![garry.west](https://avatars.discourse-cdn.com/v4/letter/g/65b543/32.png) [@garry.west](https://forums.sketchup.com/u/garry.west)\
**Post date:** [September 2, 2019, 4:37am UTC](https://forums.sketchup.com/t/new-to-this/102131/5 "2019-09-02T04:37:39Z")

</div>

just tried grouping the desogn and reexported and this is the result from the same sketchup file

 ![image](https://global.discourse-cdn.com/sketchup/original/3X/3/3/3356cc5b7c0874c7974f03e603e5ad958d005bd9.png)

---

<div class="post-metadata">

**Author:** ![Box](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/box/32/235164_2.png) [@Box](https://forums.sketchup.com/u/Box)\
**Post date:** [September 2, 2019, 4:41am UTC](https://forums.sketchup.com/t/new-to-this/102131/6 "2019-09-02T04:41:04Z")

</div>

Here, try this one.  
[tipperchassis topbox.skp](https://forums.sketchup.com/uploads/short-url/AoeE1eWmsno0y8AgfCGEFbruvRh.skp) (127.8 KB)

---

<div class="post-metadata">

**Author:** ![garry.west](https://avatars.discourse-cdn.com/v4/letter/g/65b543/32.png) [@garry.west](https://forums.sketchup.com/u/garry.west)\
**Post date:** [September 2, 2019, 4:43am UTC](https://forums.sketchup.com/t/new-to-this/102131/7 "2019-09-02T04:43:36Z")

</div>

thanks that worked so what am I doing wrong ?

---

<div class="post-metadata">

**Author:** ![Box](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/box/32/235164_2.png) [@Box](https://forums.sketchup.com/u/Box)\
**Post date:** [September 2, 2019, 4:45am UTC](https://forums.sketchup.com/t/new-to-this/102131/8 "2019-09-02T04:45:23Z")

</div>

You had internal faces and reversed faces.  
It should all be white on the outside and there should be no faces inside the structure.  
It basically needs to be one skin surrounding an open space.

---

<div class="post-metadata">

**Author:** ![garry.west](https://avatars.discourse-cdn.com/v4/letter/g/65b543/32.png) [@garry.west](https://forums.sketchup.com/u/garry.west)\
**Post date:** [September 2, 2019, 4:46am UTC](https://forums.sketchup.com/t/new-to-this/102131/9 "2019-09-02T04:46:38Z")

</div>

sorry dont understand

---

<div class="post-metadata">

**Author:** ![Box](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/box/32/235164_2.png) [@Box](https://forums.sketchup.com/u/Box)\
**Post date:** [September 2, 2019, 4:48am UTC](https://forums.sketchup.com/t/new-to-this/102131/10 "2019-09-02T04:48:33Z")

</div>

Take a cube and place another cube on top of it, there will then be one face where the two cubes join, this is an internal face and makes it not a solid.  
Your model has lots of those faces.

---

<div class="post-metadata">

**Author:** ![garry.west](https://avatars.discourse-cdn.com/v4/letter/g/65b543/32.png) [@garry.west](https://forums.sketchup.com/u/garry.west)\
**Post date:** [September 2, 2019, 4:50am UTC](https://forums.sketchup.com/t/new-to-this/102131/11 "2019-09-02T04:50:58Z")

</div>

so how do I prevent this if I am building a structure by joining items together  
is there a tutorial I should watch  
thanks for your help

---

<div class="post-metadata">

**Author:** ![Box](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/box/32/235164_2.png) [@Box](https://forums.sketchup.com/u/Box)\
**Post date:** [September 2, 2019, 5:01am UTC](https://forums.sketchup.com/t/new-to-this/102131/12 "2019-09-02T05:01:06Z")

</div>

There are many many tutorial available, some better than others.  
A good place to start is **[Sketchup Fundamentals](https://learn.sketchup.com/)**.

As for the construction, you just need to be aware of what you are building and look inside to clean up extraneous faces. You can use a section pane to look inside.

---

<div class="post-metadata">

**Author:** ![Box](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/box/32/235164_2.png) [@Box](https://forums.sketchup.com/u/Box)\
**Post date:** [September 2, 2019, 5:06am UTC](https://forums.sketchup.com/t/new-to-this/102131/13 "2019-09-02T05:06:07Z")

</div>

Thomthom’s Solid Inspector 2 helps find and fix these issues, but you want to understand the concept of a solids before relying on extensions to fix everything.

---

<div class="post-metadata">

**Author:** ![garry.west](https://avatars.discourse-cdn.com/v4/letter/g/65b543/32.png) [@garry.west](https://forums.sketchup.com/u/garry.west)\
**Post date:** [September 2, 2019, 5:09am UTC](https://forums.sketchup.com/t/new-to-this/102131/14 "2019-09-02T05:09:13Z")

</div>

thanks is that what you used to fix my design and is it downloaded from the 3d warehouse  
I will work my way through some tutorials

---

<div class="post-metadata">

**Author:** ![Box](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/box/32/235164_2.png) [@Box](https://forums.sketchup.com/u/Box)\
**Post date:** [September 2, 2019, 5:13am UTC](https://forums.sketchup.com/t/new-to-this/102131/15 "2019-09-02T05:13:28Z")

</div>

From the Extension warehouse not the 3d warehouse.

---

<div class="post-metadata">

**Author:** ![garry.west](https://avatars.discourse-cdn.com/v4/letter/g/65b543/32.png) [@garry.west](https://forums.sketchup.com/u/garry.west)\
**Post date:** [September 2, 2019, 5:33am UTC](https://forums.sketchup.com/t/new-to-this/102131/16 "2019-09-02T05:33:09Z")

</div>

thanks again that’s brilliant

---

<div class="post-metadata">

**Author:** ![garry.west](https://avatars.discourse-cdn.com/v4/letter/g/65b543/32.png) [@garry.west](https://forums.sketchup.com/u/garry.west)\
**Post date:** [September 4, 2019, 12:46am UTC](https://forums.sketchup.com/t/new-to-this/102131/17 "2019-09-04T00:46:53Z")

</div>

next problem if someone can help  
my printer is a very basic entry unit it’s a duinotech mini TL4076  
everything I print is too thin ie the z movement is too small  
I’ve just printed this as a test  
[thickness test.skp](https://forums.sketchup.com/uploads/short-url/kGDWCERqIc8bL2KzNM7ysxY8xSA.skp) (174.5 KB)  
thickness should be in mm 0.25, 0.5, 0.75, 1.0, 1.5, 2.0, 2.5, 3.0, 3.5  
actual results are 0.25, 0.5, 0.6, 0.8, 1.1, 1.5, 2.0,2.5, 3.0  
so in 3.5mm I’ve lost 0.5mm  
I replaced the flexible coupling between the motor and drive rod as it looked to be compressing when in use but the problem is back  
any suggestions , other than to buy a better printer  
currently not sure this is for me so dont want to expend too much  
I was just hoping to make parts for my model railway

---

<div class="post-metadata">

**Author:** ![Geo](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/geo/32/82_2.png) [@Geo](https://forums.sketchup.com/u/Geo)\
**Post date:** [September 4, 2019, 1:59pm UTC](https://forums.sketchup.com/t/new-to-this/102131/18 "2019-09-04T13:59:21Z")

</div>

> [@garry.west](#):
>
> I’ve just printed this as a test  
> [thickness test.skp](https://forums.sketchup.com/uploads/short-url/kGDWCERqIc8bL2KzNM7ysxY8xSA.skp) (174.5 KB)  
> thickness should be in mm  
> 0.25, 0.5, 0.75, 1.0, 1.5, 2.0, 2.5, 3.0, 3.5  
> actual results are  
> 0.25, 0.5, 0.6, 0.8, 1.1, 1.5, 2.0, 2.5, 3.0  
> so in 3.5mm I’ve lost 0.5mm

Just a guess.

Plastic print materials shrink as they cool.  
How much shrinkage depends upon the specific type of material and the shape of the print.

The thicker or larger the print … The greater the shrinkage as it cools.  
The article linked below states the following shrinkage rates. YMMV

**• ABS** shrinks by around 8 %  
**• PLA** shrinks by around 2.5 %  
**• Nylon** shrinks by around 1.7 %

> **[3D Printing Shrinkage Compensation - 3dPrinterGeeks.com](https://3dprintergeeks.com/3d-printing-shrinkage-compensation/)**
>
> When 3D printing, the size of the object highly matters, but at times, it does not. The three highly used materials in 3D printing are PLA,...
