# Need help Installing Make

**URL:** <https://forums.sketchup.com/t/need-help-installing-make/61640>\
**Category:** SketchUp\
**Created:** [February 8, 2018, 6:00pm UTC](https://forums.sketchup.com/t/need-help-installing-make/61640 "2018-02-08T18:00:54Z")\
**Posts on this page:** 14\
**Page:** 1

<div class="post-metadata">

**Author:** ![jfsjr611](https://avatars.discourse-cdn.com/v4/letter/j/c37758/32.png) [@jfsjr611](https://forums.sketchup.com/u/jfsjr611)\
**Post date:** [February 8, 2018, 6:00pm UTC](https://forums.sketchup.com/t/need-help-installing-make/61640/1 "2018-02-08T18:00:54Z")

</div>

I downloaded the old Sketchup make 2017 because Free sucks and when I start the installation I keep getting this (see attachment) and the installation quits, can anyone help? I want to install this on a seperate drive “F”, not “C” Drive, and I have no “I” drive. ![Sketchup problem](https://global.discourse-cdn.com/sketchup/original/3X/8/f/8fb13eda7d1efec1c51b581034eca1265b988fe3.JPG)

---

<div class="post-metadata">

**Author:** ![mics\_54](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/mics_54/32/42120_2.png) [@mics\_54](https://forums.sketchup.com/u/mics_54)\
**Post date:** [February 8, 2018, 6:18pm UTC](https://forums.sketchup.com/t/need-help-installing-make/61640/2 "2018-02-08T18:18:49Z")

</div>

> [@Portable Sketchup Make](https://forums.sketchup.com/t/portable-sketchup-make/8737/3):
>
> To clarify, there is not a version of SketchUp which will run from a USB device. You must have SketchUp installed on the local computer you’re using, which will then have the necessary paths and registry entries for the software to run. Even the latest version of Make will not meet this need. In all likelihood this isn’t a feature which we’ll ever address as SketchUp is very resource dependent and jumping from a computer with an integrated, non-accelerated video card to a different computer wit…

but I assumed that you were attempting to install this on a portable device. If not…ignore it. I’m no sage 🙂

---

<div class="post-metadata">

**Author:** ![mchandler](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/mchandler/32/28038_2.png) [@mchandler](https://forums.sketchup.com/u/mchandler)\
**Post date:** [February 8, 2018, 8:15pm UTC](https://forums.sketchup.com/t/need-help-installing-make/61640/3 "2018-02-08T20:15:29Z")

</div>

You need to install Make on the C: drive. Installing to other locations/drives isn’t supported.

---

<div class="post-metadata">

**Author:** ![jfsjr611](https://avatars.discourse-cdn.com/v4/letter/j/c37758/32.png) [@jfsjr611](https://forums.sketchup.com/u/jfsjr611)\
**Post date:** [February 8, 2018, 11:55pm UTC](https://forums.sketchup.com/t/need-help-installing-make/61640/4 "2018-02-08T23:55:38Z")

</div>

I tried installing Sketchup Make on my “C” drive and I still get that same message as above. I have been using Sketchup make for a couple of years now. I cleaned my PC out and reinstalled most of my programs I wanted to start fresh and this was during the Sketchup Free announcement. This is looking like to me that they want me to buy Sketchup Pro 2018

---

<div class="post-metadata">

**Author:** ![DaveR](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/daver/32/7601_2.png) [@DaveR](https://forums.sketchup.com/u/DaveR)\
**Post date:** [February 8, 2018, 11:59pm UTC](https://forums.sketchup.com/t/need-help-installing-make/61640/5 "2018-02-08T23:59:23Z")

</div>

> [@jfsjr611](#):
>
> This is looking like to me that they want me to buy Sketchup Pro 2018

Yes. Of course they want to sell you SketchUp Pro if you are using it for something other than hobby use.

Which version of SketchUp Make did you try installing? Did you right click on the installer file and choose Run as administrator? If not, it won’t install correctly.

What graphics card does your computer have? Please complete your profile.

---

<div class="post-metadata">

**Author:** ![jfsjr611](https://avatars.discourse-cdn.com/v4/letter/j/c37758/32.png) [@jfsjr611](https://forums.sketchup.com/u/jfsjr611)\
**Post date:** [February 9, 2018, 12:12am UTC](https://forums.sketchup.com/t/need-help-installing-make/61640/6 "2018-02-09T00:12:56Z")

</div>

I have been using Sketchup Make since 2015 for hobby use only. I tried installing Sketchup Make 2017. I tried running as administrator, which did not work. My graphics card is the same card I hade since 2015, it is a AMD Radeon R7 250 2GB GDDR3 PCI-E 3.0

---

<div class="post-metadata">

**Author:** ![jfsjr611](https://avatars.discourse-cdn.com/v4/letter/j/c37758/32.png) [@jfsjr611](https://forums.sketchup.com/u/jfsjr611)\
**Post date:** [February 9, 2018, 12:13am UTC](https://forums.sketchup.com/t/need-help-installing-make/61640/7 "2018-02-09T00:13:54Z")

</div>

AMD RADEON R7 250 2GB GDDR3 PCI-E 3.0  
THERMALTAKE SMART SERIES SP-750PCBUS 750W 80PLUS  
MSI 970G43 MAINBOARD  
AZZA FUSION 3000 FULL TOWER  
COOLERMASTER SEIDON 120M WATER COOLER  
2 - 4GB CORSAIR VENGEANCE 1866MHZ DDR3  
1TB SATA III 7200 RPM 3.5" HARD DRIVE  
AMD FX™-8320 EIGHT-CORE PROCESSOR  
64-BIT OPERATING SYSTEM  
WINDOWS 10  
Added 1tb ssd

---

<div class="post-metadata">

**Author:** ![mics\_54](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/mics_54/32/42120_2.png) [@mics\_54](https://forums.sketchup.com/u/mics_54)\
**Post date:** [February 9, 2018, 12:29am UTC](https://forums.sketchup.com/t/need-help-installing-make/61640/8 "2018-02-09T00:29:39Z")

</div>

wow that sounds like quite a machine. Did you ever install 2018 trial version on it?

---

<div class="post-metadata">

**Author:** ![jfsjr611](https://avatars.discourse-cdn.com/v4/letter/j/c37758/32.png) [@jfsjr611](https://forums.sketchup.com/u/jfsjr611)\
**Post date:** [February 9, 2018, 12:31am UTC](https://forums.sketchup.com/t/need-help-installing-make/61640/9 "2018-02-09T00:31:16Z")

</div>

No I did not, do you think that may be my problem?

---

<div class="post-metadata">

**Author:** ![mics\_54](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/mics_54/32/42120_2.png) [@mics\_54](https://forums.sketchup.com/u/mics_54)\
**Post date:** [February 9, 2018, 12:37am UTC](https://forums.sketchup.com/t/need-help-installing-make/61640/10 "2018-02-09T00:37:14Z")

</div>

I really have no idea but the more information there is the more likely there will be some one here to help solve the mystery. I have no problems installing any of the versions. My hhd was replaced a couple of months ago an reinstalling windows kinda changed my directories a little…but I haven’t had any serious issues with SU installations.  
You might try to install the 2018 just to see where the problem is…or if it would make any sense to the more experienced members.

---

<div class="post-metadata">

**Author:** ![SketchUp3D\_de](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/sketchup3d_de/32/167_2.png) [@SketchUp3D\_de](https://forums.sketchup.com/u/SketchUp3D_de)\
**Post date:** [February 9, 2018, 1:42pm UTC](https://forums.sketchup.com/t/need-help-installing-make/61640/11 "2018-02-09T13:42:07Z")

</div>

probably an external drive already removed.

either:

- “Start \> Run \> compmgmt.msc \> Disk Management”
- change the drive letter of an external drive (e.g. thumb stick) to the one specified in the error message or create a new drive and assign this drive letter
- install SketchUp

or:

- “Start \> Run \> cmd.exe \> right-click \> run as admin”
- “subst i: c:\temp”\*
- install SketchUp
- “subst i: /d”

\*either create this folder manually or check for the Windows system temp path by “Start \> Run \> %TEMP%”

---

<div class="post-metadata">

**Author:** ![mchandler](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/mchandler/32/28038_2.png) [@mchandler](https://forums.sketchup.com/u/mchandler)\
**Post date:** [February 9, 2018, 3:11pm UTC](https://forums.sketchup.com/t/need-help-installing-make/61640/12 "2018-02-09T15:11:19Z")

</div>

You’re downloading the installers from the following page, correct?

> **[Download All | SketchUp](https://www.sketchup.com/download/all)**

And when you run the installer, you right-click on the exe, and then select Run as administrator, correct?

---

<div class="post-metadata">

**Author:** ![jfsjr611](https://avatars.discourse-cdn.com/v4/letter/j/c37758/32.png) [@jfsjr611](https://forums.sketchup.com/u/jfsjr611)\
**Post date:** [February 9, 2018, 7:19pm UTC](https://forums.sketchup.com/t/need-help-installing-make/61640/13 "2018-02-09T19:19:58Z")

</div>

I will try this.

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/sketchup/original/3X/f/2/f2a121500b085ed60806607a82720b092d800bb3.png) [@system](https://forums.sketchup.com/u/system)\
**Post date:** [August 12, 2018, 3:20am UTC](https://forums.sketchup.com/t/need-help-installing-make/61640/14 "2018-08-12T03:20:04Z")

</div>

Closed on August 12, 2018, 3:20am UTC

This topic was automatically closed 183 days after the last reply. New replies are no longer allowed.
