# Mitres not showing

**URL:** <https://forums.sketchup.com/t/mitres-not-showing/6785>\
**Category:** SketchUp\
**Created:** [February 7, 2015, 12:25am UTC](https://forums.sketchup.com/t/mitres-not-showing/6785 "2015-02-07T00:25:28Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![harpert1](https://avatars.discourse-cdn.com/v4/letter/h/e19adc/32.png) [@harpert1](https://forums.sketchup.com/u/harpert1)\
**Post date:** [February 7, 2015, 12:25am UTC](https://forums.sketchup.com/t/mitres-not-showing/6785/1 "2015-02-07T00:25:28Z")

</div>

Hi All,  
When using Follow Me to extrude a picture frame around a rectangle, the miters are inconsistently showing up. Dunno if this is a graphics card issue? NVIDIA GeForce GT 750M on 64 bit Windows 8.1 with 16gig RAM.

[4x6 frame\_working.skp](https://forums.sketchup.com/uploads/default/3709/621b644bd6a664c6.skp) (29.8 KB)

Thanks in advance!

---

<div class="post-metadata">

**Author:** ![Shep](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/shep/32/41669_2.png) [@Shep](https://forums.sketchup.com/u/Shep)\
**Post date:** [February 7, 2015, 12:37am UTC](https://forums.sketchup.com/t/mitres-not-showing/6785/2 "2015-02-07T00:37:01Z")

</div>

There’s a flaw in the setup of your follow me function. The follow me should not leave any miters.  
Zoom in close and you can see this.

Shep

---

<div class="post-metadata">

**Author:** ![harpert1](https://avatars.discourse-cdn.com/v4/letter/h/e19adc/32.png) [@harpert1](https://forums.sketchup.com/u/harpert1)\
**Post date:** [February 7, 2015, 1:20am UTC](https://forums.sketchup.com/t/mitres-not-showing/6785/3 "2015-02-07T01:20:18Z")

</div>

Thanks Shep. Didn’t catch that error. However, the second miter shows no surface mismatch. Any thoughts on what I’m doing wrong?

---

<div class="post-metadata">

**Author:** ![Shep](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/shep/32/41669_2.png) [@Shep](https://forums.sketchup.com/u/Shep)\
**Post date:** [February 7, 2015, 1:27am UTC](https://forums.sketchup.com/t/mitres-not-showing/6785/4 "2015-02-07T01:27:12Z")

</div>

Perhaps try starting from a midpoint along the path instead of a corner.

Shep

---

<div class="post-metadata">

**Author:** ![Gully\_Foyle](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/gully_foyle/32/124_2.png) [@Gully\_Foyle](https://forums.sketchup.com/u/Gully_Foyle)\
**Post date:** [February 7, 2015, 1:41am UTC](https://forums.sketchup.com/t/mitres-not-showing/6785/5 "2015-02-07T01:41:15Z")

</div>

I’m surprised it drew any. That’s a continuous coplanar surface and Follow Me typically (in my experience) omits them. It’s okay to draw in the 45 degree lines.

Try using a profile without a horizontal flat and you’ll see the mitre lines.

-Gully

---

<div class="post-metadata">

**Author:** ![harpert1](https://avatars.discourse-cdn.com/v4/letter/h/e19adc/32.png) [@harpert1](https://forums.sketchup.com/u/harpert1)\
**Post date:** [February 9, 2015, 1:34am UTC](https://forums.sketchup.com/t/mitres-not-showing/6785/6 "2015-02-09T01:34:21Z")

</div>

Here it is with some rounds. Seems to support Gully’s point about the non-horizontal flat sections getting a line…

---

<div class="post-metadata">

**Author:** ![harpert1](https://avatars.discourse-cdn.com/v4/letter/h/e19adc/32.png) [@harpert1](https://forums.sketchup.com/u/harpert1)\
**Post date:** [February 9, 2015, 1:37am UTC](https://forums.sketchup.com/t/mitres-not-showing/6785/7 "2015-02-09T01:37:47Z")

</div>

And here it is without the surfaces. The wire frames show that the horizontal flat areas are excluded. Thanks guys for the help.
