# Mitre all sides of irregular shaped object with different angles **URL:** \ **Category:** SketchUp\ **Created:** [December 5, 2023, 2:15pm UTC](https://forums.sketchup.com/t/mitre-all-sides-of-irregular-shaped-object-with-different-angles/250653 "2023-12-05T14:15:32Z")\ **Posts on this page:** 10\ **Page:** 1
**Author:** ![Speakerguy](https://avatars.discourse-cdn.com/v4/letter/s/d07c76/32.png) [@Speakerguy](https://forums.sketchup.com/u/Speakerguy)\ **Post date:** [December 5, 2023, 2:15pm UTC](https://forums.sketchup.com/t/mitre-all-sides-of-irregular-shaped-object-with-different-angles/250653/1 "2023-12-05T14:15:32Z")
Hi, Not sure if this is the right section…my apologies if it isnt. I need help making mitre edges of different angles on an object. Basically a 20mm “board” for a speaker. I’ve half-assed made it work but the angles don’t seem to line up with another “board” its meant to meet. I’ve been drawing angles and then erasing the waste. Takes forever so there must be a faster and easier method. Please help! Damian ---
**Author:** ![paddyclown](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/paddyclown/32/192339_2.png) [@paddyclown](https://forums.sketchup.com/u/paddyclown)\ **Post date:** [December 5, 2023, 2:17pm UTC](https://forums.sketchup.com/t/mitre-all-sides-of-irregular-shaped-object-with-different-angles/250653/2 "2023-12-05T14:17:54Z")
Hi, You might try the “RoundCorner” plugin by Fredo6 as it has a “bevel” tool… ---
**Author:** ![Speakerguy](https://avatars.discourse-cdn.com/v4/letter/s/d07c76/32.png) [@Speakerguy](https://forums.sketchup.com/u/Speakerguy)\ **Post date:** [December 5, 2023, 2:34pm UTC](https://forums.sketchup.com/t/mitre-all-sides-of-irregular-shaped-object-with-different-angles/250653/3 "2023-12-05T14:34:27Z")
Hi Paddyclown, thanks for the quick reply! I just started using sketchup and don’t know what that is or how to execute it. Any chance you can explain further or post a walkthrough? I’ve literally been using it for about 4 days! Thanks Damian ---
**Author:** ![Shep](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/shep/32/41669_2.png) [@Shep](https://forums.sketchup.com/u/Shep)\ **Post date:** [December 5, 2023, 2:42pm UTC](https://forums.sketchup.com/t/mitre-all-sides-of-irregular-shaped-object-with-different-angles/250653/4 "2023-12-05T14:42:37Z")
If you could attach a model (.skp) or even a screenshot or pic of what you are working on, someone will be able to help. ---
**Author:** ![DaveR](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/daver/32/7601_2.png) [@DaveR](https://forums.sketchup.com/u/DaveR)\ **Post date:** [December 5, 2023, 2:44pm UTC](https://forums.sketchup.com/t/mitre-all-sides-of-irregular-shaped-object-with-different-angles/250653/5 "2023-12-05T14:44:31Z")
I’ll make a video showing several methods for you. ---
**Author:** ![DaveR](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/daver/32/7601_2.png) [@DaveR](https://forums.sketchup.com/u/DaveR)\ **Post date:** [December 5, 2023, 2:54pm UTC](https://forums.sketchup.com/t/mitre-all-sides-of-irregular-shaped-object-with-different-angles/250653/6 "2023-12-05T14:54:53Z")
> [@Speakerguy](#): > > I just started using sketchup and … Why did you just start with SketchUp 2021? ---
**Author:** ![Speakerguy](https://avatars.discourse-cdn.com/v4/letter/s/d07c76/32.png) [@Speakerguy](https://forums.sketchup.com/u/Speakerguy)\ **Post date:** [December 5, 2023, 3:35pm UTC](https://forums.sketchup.com/t/mitre-all-sides-of-irregular-shaped-object-with-different-angles/250653/7 "2023-12-05T15:35:53Z")
Thanks Dave! That is a great video! That should get me sorted. I will post my project tomorrow as im currently in the Philippines and it’s late here! 2021 is just the version i have access to. Thanks again! ---
**Author:** ![Speakerguy](https://avatars.discourse-cdn.com/v4/letter/s/d07c76/32.png) [@Speakerguy](https://forums.sketchup.com/u/Speakerguy)\ **Post date:** [December 6, 2023, 7:03am UTC](https://forums.sketchup.com/t/mitre-all-sides-of-irregular-shaped-object-with-different-angles/250653/8 "2023-12-06T07:03:15Z")
Hey Dave, Any idea why the link to your video won’t work today? Thanks Damian ---
**Author:** ![paddyclown](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/paddyclown/32/192339_2.png) [@paddyclown](https://forums.sketchup.com/u/paddyclown)\ **Post date:** [December 6, 2023, 9:44am UTC](https://forums.sketchup.com/t/mitre-all-sides-of-irregular-shaped-object-with-different-angles/250653/9 "2023-12-06T09:44:40Z")
Hi, the plugin is available here: [FredoCorner | SketchUcation](https://sketchucation.com/plugin/2120-fredocorner) There are videos on that page that should explain it much better than i ever could ! Good luck. ---
**Author:** ![DaveR](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/daver/32/7601_2.png) [@DaveR](https://forums.sketchup.com/u/DaveR)\ **Post date:** [December 6, 2023, 12:51pm UTC](https://forums.sketchup.com/t/mitre-all-sides-of-irregular-shaped-object-with-different-angles/250653/10 "2023-12-06T12:51:11Z")
Check your PMs.