# Medeek Truss

**URL:** <https://forums.sketchup.com/t/medeek-truss/16452>\
**Category:** Extensions\
**Tags:** roof, truss, floor-truss, mdkbim\
**Created:** [October 17, 2015, 10:26pm UTC](https://forums.sketchup.com/t/medeek-truss/16452 "2015-10-17T22:26:29Z")\
**Posts on this page:** 1\
**Showing post:** 846

<div class="post-metadata">

**Author:** ![medeek](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/medeek/32/10675_2.png) [@medeek](https://forums.sketchup.com/u/medeek)\
**Post date:** [April 25, 2019, 2:41am UTC](https://forums.sketchup.com/t/medeek-truss/16452/846 "2019-04-25T02:41:40Z")

</div>

This brings me back to some topics I was exploring last year at about this time regarding asymmetric rafter roofs. I will set aside the hip roof for a minute and look at the simple gable roof in continuation of this discussion.

Each side of the roof may have a different pitch. Additionally the top plate height may differ as well as the birdcut. Things tend to get a little complicated when the symmetry is broken.

Basically one can boil it down to a symmetric or asymmetric gable roof. The asymmetric variant will have the following additional parameters:

Roof Type: Symmetric Gable, Asymmetric Gable  
Pitch2 - Roof pitch of right side roof  
Birdcut2 - Birdcut length of right side of roof  
Delta Height - Difference in height between left and right bearing walls (left side is reference)

One could even go so far as to define a different rafter depth for the opposite side, as its length may be more or less than its opposite side:

Rafter Depth 2 - Rafter depth on right side of roof.

---

_[View the full topic](https://forums.sketchup.com/t/medeek-truss/16452)._
