# Intermediate User Needs Help

**URL:** <https://forums.sketchup.com/t/intermediate-user-needs-help/30946>\
**Category:** SketchUp\
**Created:** [September 19, 2016, 12:33pm UTC](https://forums.sketchup.com/t/intermediate-user-needs-help/30946 "2016-09-19T12:33:50Z")\
**Posts on this page:** 5\
**Page:** 2

<div class="post-metadata">

**Author:** ![mandobrit](https://avatars.discourse-cdn.com/v4/letter/m/f14d63/32.png) [@mandobrit](https://forums.sketchup.com/u/mandobrit)\
**Post date:** [September 19, 2016, 11:19pm UTC](https://forums.sketchup.com/t/intermediate-user-needs-help/30946/21 "2016-09-19T23:19:35Z")

</div>

Fantastic! Now we’re talking. It’s obvious I’m lacking certain skills, but you just showed me a way to prevent all the problems. Spent to much time doing it the wrong way.

Thank you so much Steve

---

<div class="post-metadata">

**Author:** ![mandobrit](https://avatars.discourse-cdn.com/v4/letter/m/f14d63/32.png) [@mandobrit](https://forums.sketchup.com/u/mandobrit)\
**Post date:** [September 21, 2016, 1:37am UTC](https://forums.sketchup.com/t/intermediate-user-needs-help/30946/22 "2016-09-21T01:37:22Z")

</div>

Hi Steve,

The video you sent me was great! I cleaned up one side and made the mortise and tenons, then copied and used Fling Along. Awesome!

Thanks for teaching me about that. Another learning step.

Jeff

---

<div class="post-metadata">

**Author:** ![slbaumgartner](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/slbaumgartner/32/7302_2.png) [@slbaumgartner](https://forums.sketchup.com/u/slbaumgartner)\
**Post date:** [September 21, 2016, 2:25am UTC](https://forums.sketchup.com/t/intermediate-user-needs-help/30946/23 "2016-09-21T02:25:49Z")

</div>

You’re welcome!

---

<div class="post-metadata">

**Author:** ![PerfectlyJEN](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/perfectlyjen/32/20953_2.png) [@PerfectlyJEN](https://forums.sketchup.com/u/PerfectlyJEN)\
**Post date:** [September 26, 2016, 5:18pm UTC](https://forums.sketchup.com/t/intermediate-user-needs-help/30946/24 "2016-09-26T17:18:53Z")

</div>

You can also use the scale tool to mirror. It will snap to -1 scale (which is the same as mirroring it without changing the scaling). also, if you are interested in learning more about using sketch up try some of the tutorials on YouTube. SketchUcation also has a lot of good tutorials.

Good luck and happy modeling 🙂

---

<div class="post-metadata">

**Author:** ![mandobrit](https://avatars.discourse-cdn.com/v4/letter/m/f14d63/32.png) [@mandobrit](https://forums.sketchup.com/u/mandobrit)\
**Post date:** [September 26, 2016, 8:42pm UTC](https://forums.sketchup.com/t/intermediate-user-needs-help/30946/25 "2016-09-26T20:42:27Z")

</div>

Hi Jen,

Learnt a lot from this post,especially “Flip along”, which I found amazing. Used this to complete my project attached.

Thanks,  
Jeff

[English Garden Bench.skp](https://forums.sketchup.com/uploads/short-url/EgrIG1GVhsDBO2hBBgoX3k3206.skp) (555 KB)

[Previous page](https://forums.sketchup.com/t/intermediate-user-needs-help/30946.md?page=1)
