# I am having trouble with making a solid object

**URL:** <https://forums.sketchup.com/t/i-am-having-trouble-with-making-a-solid-object/16118>\
**Category:** SketchUp\
**Tags:** geometry, creation, solid, manifold\
**Created:** [October 9, 2015, 3:55pm UTC](https://forums.sketchup.com/t/i-am-having-trouble-with-making-a-solid-object/16118 "2015-10-09T15:55:54Z")\
**Posts on this page:** 12\
**Page:** 1

<div class="post-metadata">

**Author:** ![Zxen](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/zxen/32/192864_2.png) [@Zxen](https://forums.sketchup.com/u/Zxen)\
**Post date:** [October 9, 2015, 3:55pm UTC](https://forums.sketchup.com/t/i-am-having-trouble-with-making-a-solid-object/16118/1 "2015-10-09T15:55:54Z")

</div>

I have been awake for fifty hours now trying to fix new holes that keep forming in my Sketchup images. I can’t print them and Solid Inspector keeps finding new problems. Can someone please help?

[wrist.skp](https://forums.sketchup.com/uploads/short-url/3IPQLVdPjEecpXDlgGgKX1KUowf.skp) (209.9 KB)

---

<div class="post-metadata">

**Author:** ![Cotty](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/cotty/32/251290_2.png) [@Cotty](https://forums.sketchup.com/u/Cotty)\
**Post date:** [October 9, 2015, 4:42pm UTC](https://forums.sketchup.com/t/i-am-having-trouble-with-making-a-solid-object/16118/2 "2015-10-09T16:42:30Z")

</div>

I’ve recreated that part because it was faster than the repairing of the oiginal…  
 ![](https://global.discourse-cdn.com/sketchup/original/2X/c/c07e6bd68dc81cd16628c0734ac438ff50833258.png)

[wrist\_cotty.skp](https://forums.sketchup.com/uploads/short-url/3wnsLTDXFR4rAe5rEAWR8ExkaBl.skp) (732.3 KB)

(Edit: You should change the title of this topic because it’s not a problem of solid inspector.)

---

<div class="post-metadata">

**Author:** ![Zxen](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/zxen/32/192864_2.png) [@Zxen](https://forums.sketchup.com/u/Zxen)\
**Post date:** [October 9, 2015, 6:09pm UTC](https://forums.sketchup.com/t/i-am-having-trouble-with-making-a-solid-object/16118/3 "2015-10-09T18:09:35Z")

</div>

Thanks so much, Cotty!

I have remade this multiple times but with each tweak, things get gaps in them. Is there an easy way to fill gaps in Sketchup? Thanks for showing the steps involved too.

---

<div class="post-metadata">

**Author:** ![Cotty](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/cotty/32/251290_2.png) [@Cotty](https://forums.sketchup.com/u/Cotty)\
**Post date:** [October 9, 2015, 6:31pm UTC](https://forums.sketchup.com/t/i-am-having-trouble-with-making-a-solid-object/16118/4 "2015-10-09T18:31:48Z")

</div>

It depends on the hole… it is possible with: the line tool, Curviloft, ExtrudeTools, Sandbox tools, …

---

<div class="post-metadata">

**Author:** ![slbaumgartner](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/slbaumgartner/32/7302_2.png) [@slbaumgartner](https://forums.sketchup.com/u/slbaumgartner)\
**Post date:** [October 9, 2015, 6:44pm UTC](https://forums.sketchup.com/t/i-am-having-trouble-with-making-a-solid-object/16118/5 "2015-10-09T18:44:02Z")

</div>

Of course, the best answer is to avoid creating gaps in the first place 😏! In your model, there were numerous edges inside the final shape that suggest you had small misalignments while placing and intersecting the two segments. Study the process Cotty showed, try it yourself, and if some aspect still causes problems for you, come back with more questions.

---

<div class="post-metadata">

**Author:** ![Zxen](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/zxen/32/192864_2.png) [@Zxen](https://forums.sketchup.com/u/Zxen)\
**Post date:** [October 17, 2015, 5:39pm UTC](https://forums.sketchup.com/t/i-am-having-trouble-with-making-a-solid-object/16118/6 "2015-10-17T17:39:04Z")

</div>

Thank you. I have been having serious issues trying to cut this shape in half - it is housing for a servo motor so the shape needs to click around the motor in 2 pieces.

I made a rectangle, then placed it in the centre of the shape, then highlighted everything, then intersected the faces, then grouped the top half, then moved it so it was by itself, but the rectangle did not fill the gaps in the middle - it was hollow.

I was having more solid inspector issues. Even with Cotty’s image, solid inspector reports no issues while the image is grouped, but if I explode Cotty’s image, solid inspector reports hundreds of issues.

I just want to slice the model into 2 pieces. Can someone please tell me why I’m having problems with this method?

 ![](https://global.discourse-cdn.com/sketchup/original/2X/3/3a698ff70ba75fc333f272de8d480d78e1394c47.png)  
This is what Cotty’s stl file looks like when opened in Slic3r. I had to resize it from Metres to Millimetres in sketchup because it caused memory issues in NetFabb and was being arbitrarily resized in Slic3r to fit, which also might have caused hundreds of new errors. All 3D prints I have made have ignored the correct scale. The correct scale in the print is vital.

---

<div class="post-metadata">

**Author:** ![slbaumgartner](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/slbaumgartner/32/7302_2.png) [@slbaumgartner](https://forums.sketchup.com/u/slbaumgartner)\
**Post date:** [October 17, 2015, 11:18pm UTC](https://forums.sketchup.com/t/i-am-having-trouble-with-making-a-solid-object/16118/7 "2015-10-17T23:18:00Z")

</div>

I had no issues cutting it in half, so you must be doing something wrong.

- draw a vertical rectangle larger than the wrist, oriented the way you want to split the wrist
- move it over until it passes through the center of the wrist
- delete the rectangle
- open the wrist Group for edit
- paste in place
- do Intersect Faces with-\>Context
- erase the extra geometry on one side of the rectangle, also erase the part of the rectangle outside the wrist

I tried to upload the result, but for some reason that isn’t working for me just now…

---

<div class="post-metadata">

**Author:** ![jimhami42](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/jimhami42/32/1781_2.png) [@jimhami42](https://forums.sketchup.com/u/jimhami42)\
**Post date:** [October 18, 2015, 12:36am UTC](https://forums.sketchup.com/t/i-am-having-trouble-with-making-a-solid-object/16118/8 "2015-10-18T00:36:47Z")

</div>

I used basically the same approach as Cotty outlined above. When I split it in half, I got one half that was identified as a solid and the other half not. However, when I exported them as an STL file, they loaded into MakerBot just fine:

![](https://global.discourse-cdn.com/sketchup/original/2X/e/ec58dea73463177724dc73cd162443b8c6fac0db.png)

 ![](https://global.discourse-cdn.com/sketchup/original/2X/6/62b34bfb880045fe53b0b9870185211fc698b8d9.png)

I think the area circled in red (below) may be causing SketchUp not to recognize it as a solid. This is where two boundaries cross and several surfaces meet at that point:

![](https://global.discourse-cdn.com/sketchup/original/2X/9/99bed693196fa1b4b0f91898328c5b02588d2785.png)

I also switched the model units to mm and turned off the snap-to option which may explain @slbaumgartner’s observation:

> [@slbaumgartner](#):
>
> In your model, there were numerous edges inside the final shape that suggest you had small misalignments while placing and intersecting the two segments.

Not knowing for sure the target height, I arbitrarily made the overall dimension 25mm by scaling the model down.

[wrist\_jh.skp](https://forums.sketchup.com/uploads/short-url/ck0B2oGQxmYmWh04t8zic9TKRe3.skp) (98.0 KB)

---

<div class="post-metadata">

**Author:** ![Zxen](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/zxen/32/192864_2.png) [@Zxen](https://forums.sketchup.com/u/Zxen)\
**Post date:** [October 18, 2015, 4:15am UTC](https://forums.sketchup.com/t/i-am-having-trouble-with-making-a-solid-object/16118/9 "2015-10-18T04:15:59Z")

</div>

Thanks. The rectangle never cut out anywhere until I intersected faces with context.

---

<div class="post-metadata">

**Author:** ![Zxen](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/zxen/32/192864_2.png) [@Zxen](https://forums.sketchup.com/u/Zxen)\
**Post date:** [October 18, 2015, 6:00am UTC](https://forums.sketchup.com/t/i-am-having-trouble-with-making-a-solid-object/16118/10 "2015-10-18T06:00:37Z")

</div>

Thanks so much for your in-depth observations. Very generous people here. And thanks for remaking the model. So much effort 😄

---

<div class="post-metadata">

**Author:** ![Cotty](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/cotty/32/251290_2.png) [@Cotty](https://forums.sketchup.com/u/Cotty)\
**Post date:** [October 18, 2015, 8:33am UTC](https://forums.sketchup.com/t/i-am-having-trouble-with-making-a-solid-object/16118/11 "2015-10-18T08:33:03Z")

</div>

Here’s a way with [s4u-slice](http://extensions.sketchup.com/de/content/s4u-slice) ($) and my uploaded model. Both parts are recognized as solids afterwards…  
 ![](https://global.discourse-cdn.com/sketchup/original/2X/7/785d330cae28a12b4148a63a152b7be56fc6df64.gif)

---

<div class="post-metadata">

**Author:** ![Zxen](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/zxen/32/192864_2.png) [@Zxen](https://forums.sketchup.com/u/Zxen)\
**Post date:** [November 4, 2015, 5:21am UTC](https://forums.sketchup.com/t/i-am-having-trouble-with-making-a-solid-object/16118/12 "2015-11-04T05:21:25Z")

</div>

Thanks so much Cotty. I’ll print this and probably download and pay for that plugin 🙂
