# Generate report question

**URL:** <https://forums.sketchup.com/t/generate-report-question/36760>\
**Category:** SketchUp\
**Created:** [January 3, 2017, 8:25pm UTC](https://forums.sketchup.com/t/generate-report-question/36760 "2017-01-03T20:25:16Z")\
**Posts on this page:** 14\
**Page:** 1

<div class="post-metadata">

**Author:** ![pupoksveta](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/pupoksveta/32/116495_2.png) [@pupoksveta](https://forums.sketchup.com/u/pupoksveta)\
**Post date:** [January 3, 2017, 8:25pm UTC](https://forums.sketchup.com/t/generate-report-question/36760/1 "2017-01-03T20:25:16Z")

</div>

hi  
i am trying to find out why when i am generating report in su 2016 of one cabinet it nicely shows the cabinet name and all of its supcomponents and all their attributes i choose… but…  
if i add another cabinet to the model then the report shows txo cabinets …  
cabinet 1 than cabinet 2 and than it shows ssubcomponent let say shelf 500mm(cab1), 600mm(cab2)…  
this is realy messing things up.  
how can i get report for each componen and it subcomponents separately?

for example:  
CABINET1  
shelve  
left side  
.  
.  
CABINET 2  
shelve  
leftside  
.  
.  
is there a way to get it this way?  
thanks

---

<div class="post-metadata">

**Author:** ![DanRathbun](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/danrathbun/32/500_2.png) [@DanRathbun](https://forums.sketchup.com/u/DanRathbun)\
**Post date:** [January 3, 2017, 10:02pm UTC](https://forums.sketchup.com/t/generate-report-question/36760/2 "2017-01-03T22:02:12Z")

</div>

Use selection reports, and run two reports by selecting each cabinet before each report:

![](https://global.discourse-cdn.com/sketchup/original/3X/d/4/d45dd64de2f097ff9626783d0ffd3edcd9bc313c.png)

---

<div class="post-metadata">

**Author:** ![pupoksveta](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/pupoksveta/32/116495_2.png) [@pupoksveta](https://forums.sketchup.com/u/pupoksveta)\
**Post date:** [January 3, 2017, 10:13pm UTC](https://forums.sketchup.com/t/generate-report-question/36760/3 "2017-01-03T22:13:26Z")

</div>

thanks for your reply  
my model contains 14 of upper cabinets that are made of subcomponent with the same name and 14 down cabinets . so am u supposed to generate it 28 times?  
I am looking for an easier way of reporting attributes of my models.

---

<div class="post-metadata">

**Author:** ![DaveR](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/daver/32/7601_2.png) [@DaveR](https://forums.sketchup.com/u/DaveR)\
**Post date:** [January 3, 2017, 11:56pm UTC](https://forums.sketchup.com/t/generate-report-question/36760/4 "2017-01-03T23:56:23Z")

</div>

What attributes do you need from your report?

---

<div class="post-metadata">

**Author:** ![pupoksveta](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/pupoksveta/32/116495_2.png) [@pupoksveta](https://forums.sketchup.com/u/pupoksveta)\
**Post date:** [January 4, 2017, 5:28am UTC](https://forums.sketchup.com/t/generate-report-question/36760/5 "2017-01-04T05:28:28Z")

</div>

hi DaveR,  
thanks for your reply.  
I need a report that separates cabinets individually and shows their subcomponent’s attributes like this: lenx  
CABINET 1. 200mm  
shelve. 182mm  
side panel. 720mm

CABINET 2. 500mm  
shelve. 482mm  
side panel. 720mm

but all it does now is:  
CABINET 1. 200mm  
CABINET 2. 500 mm  
shelve. 182mm, 482mm  
side panel. 720mm. 2x

this gets very messy in larger projects.  
I need every cabinet and subcomponent separately that me and other people I work with could see that (for example) cabinet 14’s shelve lenx is 550mm right ahead and not looking for it in within bunch of numbers. there is no time for it.  
thanks again

---

<div class="post-metadata">

**Author:** ![pcmoor](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/pcmoor/32/3427_2.png) [@pcmoor](https://forums.sketchup.com/u/pcmoor)\
**Post date:** [January 4, 2017, 6:22am UTC](https://forums.sketchup.com/t/generate-report-question/36760/6 "2017-01-04T06:22:15Z")

</div>

can you share a typical model,(private message if sensitive), then can look into the report options, or maybe generate a report with the internet not connected to force a default report on all entities, then one can open it with excel and make a vba routine to sort the data if necessary

---

<div class="post-metadata">

**Author:** ![DaveR](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/daver/32/7601_2.png) [@DaveR](https://forums.sketchup.com/u/DaveR)\
**Post date:** [January 4, 2017, 10:11am UTC](https://forums.sketchup.com/t/generate-report-question/36760/7 "2017-01-04T10:11:12Z")

</div>

You could use the [CutList](http://extensions.sketchup.com/en/content/cutlist) extension for this. Select “By Sub-Assembly” and the the parts for each cabinet will be sorted into a separate section. Export a CSV and rearrange the table to suit your needs in Excel.

---

<div class="post-metadata">

**Author:** ![pupoksveta](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/pupoksveta/32/116495_2.png) [@pupoksveta](https://forums.sketchup.com/u/pupoksveta)\
**Post date:** [January 4, 2017, 12:34pm UTC](https://forums.sketchup.com/t/generate-report-question/36760/8 "2017-01-04T12:34:56Z")

</div>

I know the cut list pretty well and I think it is good plugin but I can’t spent time with sorting exel to my needs. the general report should be able to do it that way I am talking about. it has to have the option to do it that way. it is the most basic way.

---

<div class="post-metadata">

**Author:** ![pupoksveta](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/pupoksveta/32/116495_2.png) [@pupoksveta](https://forums.sketchup.com/u/pupoksveta)\
**Post date:** [January 4, 2017, 12:40pm UTC](https://forums.sketchup.com/t/generate-report-question/36760/9 "2017-01-04T12:40:22Z")

</div>

poor thanks,  
I will post some small kind of kitchen. something easy.  
at the moment I have to do some work and also the DC cabinets I have are made in Slovak language so have to rewrite them for you to understand. I will do so latter on. thank you

---

<div class="post-metadata">

**Author:** ![pupoksveta](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/pupoksveta/32/116495_2.png) [@pupoksveta](https://forums.sketchup.com/u/pupoksveta)\
**Post date:** [January 4, 2017, 12:42pm UTC](https://forums.sketchup.com/t/generate-report-question/36760/10 "2017-01-04T12:42:39Z")

</div>

> [@pupoksveta](#):
>
> poor

pcmoor

---

<div class="post-metadata">

**Author:** ![DaveR](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/daver/32/7601_2.png) [@DaveR](https://forums.sketchup.com/u/DaveR)\
**Post date:** [January 4, 2017, 12:43pm UTC](https://forums.sketchup.com/t/generate-report-question/36760/11 "2017-01-04T12:43:58Z")

</div>

CutLists report _would_ sort the list into sub-assemblies as you requested. You wouldn’t have to do that manually.

---

<div class="post-metadata">

**Author:** ![pupoksveta](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/pupoksveta/32/116495_2.png) [@pupoksveta](https://forums.sketchup.com/u/pupoksveta)\
**Post date:** [January 4, 2017, 12:51pm UTC](https://forums.sketchup.com/t/generate-report-question/36760/12 "2017-01-04T12:51:50Z")

</div>

I will play little more with it.thanks  
also I was looking for somebody that would do some scripting to create plugin for me and that would sort my problem. would you be able to do it for me? or do you know anybody? thank you

---

<div class="post-metadata">

**Author:** ![DaveR](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/daver/32/7601_2.png) [@DaveR](https://forums.sketchup.com/u/DaveR)\
**Post date:** [January 4, 2017, 1:01pm UTC](https://forums.sketchup.com/t/generate-report-question/36760/13 "2017-01-04T13:01:05Z")

</div>

I’m not a plugin writer. Post your request in the Commercial and Collabortive Work category. You’ll probably find someone willing to do it.

---

<div class="post-metadata">

**Author:** ![Wisext](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/wisext/32/214269_2.png) [@Wisext](https://forums.sketchup.com/u/Wisext)\
**Post date:** [January 12, 2017, 11:13pm UTC](https://forums.sketchup.com/t/generate-report-question/36760/14 "2017-01-12T23:13:08Z")

</div>

Hi, you could try the SU2XL extension : [Extension | SketchUp Extension Warehouse](https://extensions.sketchup.com/en/content/su2xl-0)  
You get distinct values for entities you tag with attributes (named wattributes in the tool).
