# Flatten a cone

**URL:** <https://forums.sketchup.com/t/flatten-a-cone/125834>\
**Category:** Pro\
**Created:** [May 18, 2020, 9:07pm UTC](https://forums.sketchup.com/t/flatten-a-cone/125834 "2020-05-18T21:07:59Z")\
**Posts on this page:** 1\
**Showing post:** 8

<div class="post-metadata">

**Author:** ![endlessfix](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/endlessfix/32/148757_2.png) [@endlessfix](https://forums.sketchup.com/u/endlessfix)\
**Post date:** [May 19, 2020, 12:37am UTC](https://forums.sketchup.com/t/flatten-a-cone/125834/8 "2020-05-19T00:37:19Z")

</div>

> [@2D pattern from 3D shape](https://forums.sketchup.com/t/2d-pattern-from-3d-shape/124376/4):
>
> Ok I have a guess, I think you want to flatten the cone section so you can derive a 2d pattern. There are plugins for this, here is a native solution. I took as single facet of your cone and laid it flat. Then I drew two lines on the long edges to find the new center and rotate copied the 16 faces around that center. Is this the idea? [Wedge (1).skp](https://forums.sketchup.com/uploads/short-url/u9IKCVk8FHVhSrtclk2aypdJwjo.skp) (42.6 KB) [Screen Shot 2020-05-04 at 12.48.31 PM]

---

_[View the full topic](https://forums.sketchup.com/t/flatten-a-cone/125834)._
