# Face-creating offset

**URL:** <https://forums.sketchup.com/t/face-creating-offset/72713>\
**Category:** Extensions\
**Tags:** offset, face\
**Created:** [July 22, 2018, 8:06am UTC](https://forums.sketchup.com/t/face-creating-offset/72713 "2018-07-22T08:06:28Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![michal.p](https://avatars.discourse-cdn.com/v4/letter/m/3ec8ea/32.png) [@michal.p](https://forums.sketchup.com/u/michal.p)\
**Post date:** [July 22, 2018, 8:06am UTC](https://forums.sketchup.com/t/face-creating-offset/72713/1 "2018-07-22T08:06:28Z")

</div>

Hi!  
There are a few plugins to offset faces and polylines but none of them does a simple thing that would be very handy - if you offset a polyline it would add two edges: one at its beginning, one at the end, perpendicular appropriately to first and last edge of polyline, and this way enclose a face between the source and new polyline. What do you think about this idea?

 ![face-creating%20offset](https://global.discourse-cdn.com/sketchup/original/3X/1/b/1b9dcee6903b8d5ed045eb53547f8fe2a5e13e85.png)

---

<div class="post-metadata">

**Author:** ![DanRathbun](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/danrathbun/32/500_2.png) [@DanRathbun](https://forums.sketchup.com/u/DanRathbun)\
**Post date:** [July 22, 2018, 4:23pm UTC](https://forums.sketchup.com/t/face-creating-offset/72713/2 "2018-07-22T16:23:01Z")

</div>

It might be nice as a modifier to the native tool, to join the ends and create the face.

But, as far as forcing perpendicular joining,… SketchUp is 3D and does not actually have a concept of forced orthogonal mode. (Perhaps if the view was using parallel projection camera and it’s eye-\>target vector was perpendicular to the drawing plane then a “perpendicular offset” might be appropriate.)

---

<div class="post-metadata">

**Author:** ![TIG](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/tig/32/198_2.png) [@TIG](https://forums.sketchup.com/u/TIG)\
**Post date:** [July 22, 2018, 8:32pm UTC](https://forums.sketchup.com/t/face-creating-offset/72713/3 "2018-07-22T20:32:02Z")

</div>

My [old] tool:  
[[Plugin] Extrude Edges By Offset v1.0 20110525 • sketchUcation • 1](https://sketchucation.com/forums/viewtopic.php?p=331303#p331303)  
is an edge offset too, somewhat like you describe…  
The full toolset is here:  
[SketchUp Plugins | PluginStore | SketchUcation](https://sketchucation.com/pluginstore?pln=ExtrudeTools)

---

<div class="post-metadata">

**Author:** ![michal.p](https://avatars.discourse-cdn.com/v4/letter/m/3ec8ea/32.png) [@michal.p](https://forums.sketchup.com/u/michal.p)\
**Post date:** [September 10, 2018, 11:28am UTC](https://forums.sketchup.com/t/face-creating-offset/72713/4 "2018-09-10T11:28:08Z")

</div>

Yes, it’s more-less what I will need, thanks (and sorry for long response).

Are you perhaps planning to make some update to Extrude Tools? It asks lots of questions which makes the tool not very fast. It would be nice to put them all into one single window that would appear before geometry is drawn.
