# Drawing ductwork transition rectangular to round?

**URL:** <https://forums.sketchup.com/t/drawing-ductwork-transition-rectangular-to-round/18660>\
**Category:** SketchUp\
**Created:** [December 18, 2015, 10:41pm UTC](https://forums.sketchup.com/t/drawing-ductwork-transition-rectangular-to-round/18660 "2015-12-18T22:41:23Z")\
**Posts on this page:** 10\
**Page:** 1

<div class="post-metadata">

**Author:** ![engineerman1](https://avatars.discourse-cdn.com/v4/letter/e/838e76/32.png) [@engineerman1](https://forums.sketchup.com/u/engineerman1)\
**Post date:** [December 18, 2015, 10:41pm UTC](https://forums.sketchup.com/t/drawing-ductwork-transition-rectangular-to-round/18660/1 "2015-12-18T22:41:23Z")

</div>

i have tried several times and get the same result. the structure appears warped.  
I draw a rectangle on axis.  
I draw a vertical line from center  
I draw a circle on the surface of the rectangle at new center line.  
I pull it up a couple of inches.  
I double click on the cylinder I just drew, use move, hit alt key, then hit the arrow key to go straight up.  
it works fine until you pan around and see a bulge in the transition.  
what am I doing wrong? is there a better way?

---

<div class="post-metadata">

**Author:** ![TheOnlyAaron](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/theonlyaaron/32/9436_2.png) [@TheOnlyAaron](https://forums.sketchup.com/u/TheOnlyAaron)\
**Post date:** [December 18, 2015, 10:43pm UTC](https://forums.sketchup.com/t/drawing-ductwork-transition-rectangular-to-round/18660/2 "2015-12-18T22:43:02Z")

</div>

Anyway you can post a picture, or share a SKP file? I cannot quite picture what you are describing.

---

<div class="post-metadata">

**Author:** ![jvleearchitects](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/jvleearchitects/32/149_2.png) [@jvleearchitects](https://forums.sketchup.com/u/jvleearchitects)\
**Post date:** [December 18, 2015, 10:45pm UTC](https://forums.sketchup.com/t/drawing-ductwork-transition-rectangular-to-round/18660/3 "2015-12-18T22:45:08Z")

</div>

Is there a reason you tap the alt key in this process?

To elicit the most responsive answers, you should post your skp file so that everyone can see what you have done, despite your well crafted description.

---

<div class="post-metadata">

**Author:** ![Box](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/box/32/235164_2.png) [@Box](https://forums.sketchup.com/u/Box)\
**Post date:** [December 18, 2015, 11:58pm UTC](https://forums.sketchup.com/t/drawing-ductwork-transition-rectangular-to-round/18660/4 "2015-12-18T23:58:24Z")

</div>

Does this help?

> [@Transition from Circle to Square](http://forums.sketchup.com/t/transition-from-circle-to-square/17065):
>
> People regularly ask how to go from a circle to a square and often the response is to suggest a plugin or hand stitch. Here is a simple demo using the cardinal points to reshape a circle into a square. Understanding the cardinals can drastically simplify your workflow. [image]

---

<div class="post-metadata">

**Author:** ![engineerman1](https://avatars.discourse-cdn.com/v4/letter/e/838e76/32.png) [@engineerman1](https://forums.sketchup.com/u/engineerman1)\
**Post date:** [December 19, 2015, 5:16pm UTC](https://forums.sketchup.com/t/drawing-ductwork-transition-rectangular-to-round/18660/5 "2015-12-19T17:16:26Z")

</div>

Thanks so much. the reason I did not include was that I don’t know how to add that into the email.  
I agree that is a cool way to communicate.

---

<div class="post-metadata">

**Author:** ![engineerman1](https://avatars.discourse-cdn.com/v4/letter/e/838e76/32.png) [@engineerman1](https://forums.sketchup.com/u/engineerman1)\
**Post date:** [December 19, 2015, 5:19pm UTC](https://forums.sketchup.com/t/drawing-ductwork-transition-rectangular-to-round/18660/6 "2015-12-19T17:19:57Z")

</div>

I wish I knew how to make a video and send it to you. if you can explain it to me I will send it out to clarify.  
What I described works, but the image is distorted. These are more or less standard shapes used in dust collecting systems. they look like a funnel with a small circular sleeve on one end and a rectangular opening on the other.  
Anyway, thanks for your help.  
D

---

<div class="post-metadata">

**Author:** ![jvleearchitects](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/jvleearchitects/32/149_2.png) [@jvleearchitects](https://forums.sketchup.com/u/jvleearchitects)\
**Post date:** [December 19, 2015, 5:35pm UTC](https://forums.sketchup.com/t/drawing-ductwork-transition-rectangular-to-round/18660/7 "2015-12-19T17:35:45Z")

</div>

You can attach a file to your post by clicking on the 7th icon from the left in the Reply box (the up arrow with the horizontal bar below it). Once you click the icon, navigate to the file location on your computer and then just follow the on screen instructions to send the file.

---

<div class="post-metadata">

**Author:** ![engineerman1](https://avatars.discourse-cdn.com/v4/letter/e/838e76/32.png) [@engineerman1](https://forums.sketchup.com/u/engineerman1)\
**Post date:** [December 19, 2015, 5:40pm UTC](https://forums.sketchup.com/t/drawing-ductwork-transition-rectangular-to-round/18660/8 "2015-12-19T17:40:49Z")

</div>

How do I reply to the entire group in an email? would save time for all?  
Thanks in advance for any counsel on this matter.

---

<div class="post-metadata">

**Author:** ![jvleearchitects](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/jvleearchitects/32/149_2.png) [@jvleearchitects](https://forums.sketchup.com/u/jvleearchitects)\
**Post date:** [December 19, 2015, 5:45pm UTC](https://forums.sketchup.com/t/drawing-ductwork-transition-rectangular-to-round/18660/9 "2015-12-19T17:45:49Z")

</div>

When you post a file as I just described, everyone reading the post has access to the attachment. This public forum is not quite the same thing as a private email. If you have a need to communicate privately with someone on this forum, you may use the Message feature. See the message box associated with your user name or another individual’s user name as an example. Click the username to get the Message box to appear. Using that feature allows you to directly write to only that individual.

---

<div class="post-metadata">

**Author:** ![Gully\_Foyle](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/gully_foyle/32/124_2.png) [@Gully\_Foyle](https://forums.sketchup.com/u/Gully_Foyle)\
**Post date:** [December 19, 2015, 6:00pm UTC](https://forums.sketchup.com/t/drawing-ductwork-transition-rectangular-to-round/18660/10 "2015-12-19T18:00:10Z")

</div>

Try this:

 ![](https://global.discourse-cdn.com/sketchup/original/2X/5/5728124964ed3cb095fa188f347c7c36966aa144.png)

-Gully
