# Drawing a curved pipe

**URL:** <https://forums.sketchup.com/t/drawing-a-curved-pipe/20323>\
**Category:** SketchUp\
**Created:** [February 12, 2016, 10:23pm UTC](https://forums.sketchup.com/t/drawing-a-curved-pipe/20323 "2016-02-12T22:23:47Z")\
**Posts on this page:** 16\
**Page:** 1

<div class="post-metadata">

**Author:** ![sticky](https://avatars.discourse-cdn.com/v4/letter/s/ce73a5/32.png) [@sticky](https://forums.sketchup.com/u/sticky)\
**Post date:** [February 12, 2016, 10:23pm UTC](https://forums.sketchup.com/t/drawing-a-curved-pipe/20323/1 "2016-02-12T22:23:47Z")

</div>

I’ve been trying various things, including bezier curve tool. but cannot get my head round this  
I have mapped out circles in an xyz but getting a nice curve or any curve is eluding me  
attched file of what I have[MainTubes3.skp](https://forums.sketchup.com/uploads/short-url/j93C4Tu9uCGqnflnO34jpGRcSiI.skp) (204.0 KB)

---

<div class="post-metadata">

**Author:** ![ChrisDizon](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/chrisdizon/32/61_2.png) [@ChrisDizon](https://forums.sketchup.com/u/ChrisDizon)\
**Post date:** [February 12, 2016, 10:45pm UTC](https://forums.sketchup.com/t/drawing-a-curved-pipe/20323/2 "2016-02-12T22:45:56Z")

</div>

sticky

Is this what you are looking for?

 ![](https://global.discourse-cdn.com/sketchup/original/2X/1/1ad7bd4e7ab7e0330b017cee58765d15064e76e7.png)

Top pipe was done with SketchUp’s FollowMe tool.

 ![](https://global.discourse-cdn.com/sketchup/original/2X/1/1dd4fea23512313867b7f32a7f78a5ae4dbcc016.gif)

Bottom pipe was done with Curviloft:

 ![](https://global.discourse-cdn.com/sketchup/original/2X/3/3fad3300162be433b744705212a9604c857dbe40.gif)

CD

---

<div class="post-metadata">

**Author:** ![TIG](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/tig/32/198_2.png) [@TIG](https://forums.sketchup.com/u/TIG)\
**Post date:** [February 12, 2016, 10:49pm UTC](https://forums.sketchup.com/t/drawing-a-curved-pipe/20323/3 "2016-02-12T22:49:24Z")

</div>

It’s not immediately obvious what your issue is.

If the centers of all of your floating disks represent the nodes of some curve that you want to create, then simply draw lines between those centers.  
When you have those various edges, then [if you want them as part of a ‘smooth’ curve] select them, and then use a plugin/extension like:

> **[SketchUp Plugins | PluginStore | SketchUcation](https://sketchucation.com/pluginstore?pln=TIG-weld)**
>
> SketchUp Plugin and Extension Store by SketchUcation provides free downloads of hundreds of SketchUp extensions and plugins

to ‘weld’ them into a ‘bound-curve’…  
Otherwise just select those separate edges and use them as you wish [you can always smooth it later]…

Now do whatever you want with this new ‘curve’…

---

<div class="post-metadata">

**Author:** ![sticky](https://avatars.discourse-cdn.com/v4/letter/s/ce73a5/32.png) [@sticky](https://forums.sketchup.com/u/sticky)\
**Post date:** [February 12, 2016, 10:53pm UTC](https://forums.sketchup.com/t/drawing-a-curved-pipe/20323/4 "2016-02-12T22:53:35Z")

</div>

yes it is but follow me sent pipe off on funny angles I’ll try again. do you delete the radius line and just leave a centre mark

---

<div class="post-metadata">

**Author:** ![ChrisDizon](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/chrisdizon/32/61_2.png) [@ChrisDizon](https://forums.sketchup.com/u/ChrisDizon)\
**Post date:** [February 12, 2016, 11:02pm UTC](https://forums.sketchup.com/t/drawing-a-curved-pipe/20323/5 "2016-02-12T23:02:26Z")

</div>

For FollowMe, I created an edge “path” from each circle’s center. After the path was created, I deleted all but the first circle and the path. **Select the full path first**! → activate FollowMe and pick the face of the first circle… DONE.

---

<div class="post-metadata">

**Author:** ![sticky](https://avatars.discourse-cdn.com/v4/letter/s/ce73a5/32.png) [@sticky](https://forums.sketchup.com/u/sticky)\
**Post date:** [February 12, 2016, 11:11pm UTC](https://forums.sketchup.com/t/drawing-a-curved-pipe/20323/6 "2016-02-12T23:11:03Z")

</div>

I will have a look at the plug in thanks.

---

<div class="post-metadata">

**Author:** ![sticky](https://avatars.discourse-cdn.com/v4/letter/s/ce73a5/32.png) [@sticky](https://forums.sketchup.com/u/sticky)\
**Post date:** [February 13, 2016, 7:24pm UTC](https://forums.sketchup.com/t/drawing-a-curved-pipe/20323/7 "2016-02-13T19:24:26Z")

</div>

Thanks for the help on this I have now done this

---

<div class="post-metadata">

**Author:** ![kdobrev](https://avatars.discourse-cdn.com/v4/letter/k/bc8723/32.png) [@kdobrev](https://forums.sketchup.com/u/kdobrev)\
**Post date:** [June 17, 2020, 5:16am UTC](https://forums.sketchup.com/t/drawing-a-curved-pipe/20323/8 "2020-06-17T05:16:56Z")

</div>

[Ford Maverick roof rack.skp](https://forums.sketchup.com/uploads/short-url/qefLYOycLpBwcVjLF4qIazwhvdf.skp) (528.7 KB)

Can someone help me how to preate a face at the end of the pipe, where in real life there is a face.

---

<div class="post-metadata">

**Author:** ![Box](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/box/32/235164_2.png) [@Box](https://forums.sketchup.com/u/Box)\
**Post date:** [June 17, 2020, 5:21am UTC](https://forums.sketchup.com/t/drawing-a-curved-pipe/20323/9 "2020-06-17T05:21:49Z")

</div>

I’m not sure what you want to do. here I have just finished it as a complete loop.  
 ![Rack](https://global.discourse-cdn.com/sketchup/original/3X/1/1/11d241dda9a68d9a79f486d1ccd64b5df2f1fce3.gif)

---

<div class="post-metadata">

**Author:** ![kdobrev](https://avatars.discourse-cdn.com/v4/letter/k/bc8723/32.png) [@kdobrev](https://forums.sketchup.com/u/kdobrev)\
**Post date:** [June 17, 2020, 6:08am UTC](https://forums.sketchup.com/t/drawing-a-curved-pipe/20323/10 "2020-06-17T06:08:19Z")

</div>

I want to be able to grad what you dragged. This is not a face for me or rather the inner and the outer faces of the pipe are not connected. So maybe my question is what did you do just prior to using the push/pull tool. In the screenshot I show what hapens if I try to push both sides and also please not the difference of the color ot the “empty space” inside the tube. Maybe there is something wrong.

 ![Capture](https://global.discourse-cdn.com/sketchup/original/3X/6/3/63473cf30c2a6995e3452271ea99a4c88d09f031.png)

---

<div class="post-metadata">

**Author:** ![Box](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/box/32/235164_2.png) [@Box](https://forums.sketchup.com/u/Box)\
**Post date:** [June 17, 2020, 6:10am UTC](https://forums.sketchup.com/t/drawing-a-curved-pipe/20323/11 "2020-06-17T06:10:00Z")

</div>

> [@kdobrev](#):
>
> my question is what did you do just prior to using the push/pull tool

Nothing

---

<div class="post-metadata">

**Author:** ![kdobrev](https://avatars.discourse-cdn.com/v4/letter/k/bc8723/32.png) [@kdobrev](https://forums.sketchup.com/u/kdobrev)\
**Post date:** [June 17, 2020, 6:14am UTC](https://forums.sketchup.com/t/drawing-a-curved-pipe/20323/12 "2020-06-17T06:14:04Z")

</div>

Yes, by pulling it closes, but only the outer part. So please try to enlarge the gap between the two sides.

---

<div class="post-metadata">

**Author:** ![Box](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/box/32/235164_2.png) [@Box](https://forums.sketchup.com/u/Box)\
**Post date:** [June 17, 2020, 6:18am UTC](https://forums.sketchup.com/t/drawing-a-curved-pipe/20323/13 "2020-06-17T06:18:22Z")

</div>

Something like this?  
 ![Gap](https://global.discourse-cdn.com/sketchup/original/3X/f/f/ff17ccbb47763b768f3c4a4828b69745b706a848.gif)

---

<div class="post-metadata">

**Author:** ![kdobrev](https://avatars.discourse-cdn.com/v4/letter/k/bc8723/32.png) [@kdobrev](https://forums.sketchup.com/u/kdobrev)\
**Post date:** [June 17, 2020, 6:26am UTC](https://forums.sketchup.com/t/drawing-a-curved-pipe/20323/14 "2020-06-17T06:26:22Z")

</div>

I think yes. Thank you. i have to run for work as am already getting late. Will try it later and give feedback.

---

<div class="post-metadata">

**Author:** ![dj83659](https://avatars.discourse-cdn.com/v4/letter/d/e99b99/32.png) [@dj83659](https://forums.sketchup.com/u/dj83659)\
**Post date:** [November 6, 2023, 4:38pm UTC](https://forums.sketchup.com/t/drawing-a-curved-pipe/20323/15 "2023-11-06T16:38:48Z")

</div>

> [@ChrisDizon](#):
>
> **Select the full path first**!

Thank you.

---

<div class="post-metadata">

**Author:** ![jean\_lemire\_1](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/jean_lemire_1/32/665_2.png) [@jean\_lemire\_1](https://forums.sketchup.com/u/jean_lemire_1)\
**Post date:** [November 6, 2023, 6:29pm UTC](https://forums.sketchup.com/t/drawing-a-curved-pipe/20323/16 "2023-11-06T18:29:25Z")

</div>

You can also select the X-Ray mode after starting the Push/Pull to reveal the complete path.

One of the strengths of SketchUp is being able to orbit, pan, zoom, change scene, change rendering mode in the middle of any operation.
