# Conversion/accuracy errors

**URL:** <https://forums.sketchup.com/t/conversion-accuracy-errors/190289>\
**Category:** Pro\
**Created:** [February 18, 2022, 11:29am UTC](https://forums.sketchup.com/t/conversion-accuracy-errors/190289 "2022-02-18T11:29:28Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Gemzy](https://avatars.discourse-cdn.com/v4/letter/g/ebca7d/32.png) [@Gemzy](https://forums.sketchup.com/u/Gemzy)\
**Post date:** [February 18, 2022, 11:29am UTC](https://forums.sketchup.com/t/conversion-accuracy-errors/190289/1 "2022-02-18T11:29:28Z")

</div>

Hi, I just tried exporting something to dwg/dxf, but when measuring distances etc they don’t correspond to the original sketchup drawing. A distance of 85mm measures in the dwg around 83-87mm, it even isn’t the same when I try it again. I used several dwg viewer to be sure.  
Is this ‘normal’? Is Sketchup not meant to be used for such accurate stuff? I use it to draw stuff that needs to be lasered and/or cut so precision is needed.

---

<div class="post-metadata">

**Author:** ![Box](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/box/32/235164_2.png) [@Box](https://forums.sketchup.com/u/Box)\
**Post date:** [February 18, 2022, 11:30am UTC](https://forums.sketchup.com/t/conversion-accuracy-errors/190289/2 "2022-02-18T11:30:45Z")

</div>

Set the Camera Standard View Top, or whichever is appropriate, and to Parallel Projection before you export.

---

<div class="post-metadata">

**Author:** ![Gemzy](https://avatars.discourse-cdn.com/v4/letter/g/ebca7d/32.png) [@Gemzy](https://forums.sketchup.com/u/Gemzy)\
**Post date:** [February 18, 2022, 12:50pm UTC](https://forums.sketchup.com/t/conversion-accuracy-errors/190289/3 "2022-02-18T12:50:50Z")

</div>

Ok so apparently it did turn out to be the dwg viewer. I used the official Autodesk Free Online viewer and there everything is ok.
