# Component Axes (for use in DC)

**URL:** <https://forums.sketchup.com/t/component-axes-for-use-in-dc/105120>\
**Category:** SketchUp\
**Created:** [October 3, 2019, 5:37pm UTC](https://forums.sketchup.com/t/component-axes-for-use-in-dc/105120 "2019-10-03T17:37:04Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![DadioB](https://avatars.discourse-cdn.com/v4/letter/d/dbc845/32.png) [@DadioB](https://forums.sketchup.com/u/DadioB)\
**Post date:** [October 3, 2019, 5:37pm UTC](https://forums.sketchup.com/t/component-axes-for-use-in-dc/105120/1 "2019-10-03T17:37:04Z")

</div>

Using Sketchup Pro 2019 on a MAC …

I have a simple cabinet (made of component parts) with Width on Red Axis, Depth on the Green and Height on the Blue.

I select the parts and create a component.  
I context click … choose Change Axes to move the axis to the back-left corner (to assist in future placement).

I set the red and green axis … but the blue axis is facing “down” (i.e. away from the cabinet).  
I cannot seem to figure out how to get the blue axis to face up? And, if I context-click and select the blue axis to adjust - then one of the other axis points “away” from the cabinet.

The help page says “pay attention to the other axis” … I cannot seem to get the “other axis” to go in the intended direction!

---

<div class="post-metadata">

**Author:** ![DaveR](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/daver/32/7601_2.png) [@DaveR](https://forums.sketchup.com/u/DaveR)\
**Post date:** [October 3, 2019, 5:38pm UTC](https://forums.sketchup.com/t/component-axes-for-use-in-dc/105120/2 "2019-10-03T17:38:14Z")

</div>

Make either the red or the green axis run in the opposite direction from what you did. Then the blue axis should point up.  
 ![axes](https://global.discourse-cdn.com/sketchup/original/3X/0/3/03385a70f443a7238dd18da563ffddfe0678b43d.gif)

---

<div class="post-metadata">

**Author:** ![DadioB](https://avatars.discourse-cdn.com/v4/letter/d/dbc845/32.png) [@DadioB](https://forums.sketchup.com/u/DadioB)\
**Post date:** [October 3, 2019, 5:43pm UTC](https://forums.sketchup.com/t/component-axes-for-use-in-dc/105120/3 "2019-10-03T17:43:37Z")

</div>

Understood; however, I’d like all THREE axes to point in my intended direction. For example, on the component parts, I want the blue axis to “originate” on the bottom of the part and point “up” … the green axis to point along the edge I intend to be “with the grain” and the red axes to point along the part for the edge that will be “against” the grain. That way, when I export to CNC the parts - they are all aligned properly AND in my DC “math”, the numbers will make logical sense. By logical sense, I mean that (with the Blue axis pointing down) the height of the cabinet is a negative number …

---

<div class="post-metadata">

**Author:** ![DaveR](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/daver/32/7601_2.png) [@DaveR](https://forums.sketchup.com/u/DaveR)\
**Post date:** [October 3, 2019, 5:44pm UTC](https://forums.sketchup.com/t/component-axes-for-use-in-dc/105120/4 "2019-10-03T17:44:30Z")

</div>

> [@DadioB](#):
>
> I’d like all THREE axes to point in my intended direction.

That’s just not the way the axes work in SketchUp.

Maybe you need to find a different corner for the component origin, then. Of course that will screw with the DC math for positions of the parts so you’ll have to fix that math.

---

<div class="post-metadata">

**Author:** ![DadioB](https://avatars.discourse-cdn.com/v4/letter/d/dbc845/32.png) [@DadioB](https://forums.sketchup.com/u/DadioB)\
**Post date:** [October 3, 2019, 5:47pm UTC](https://forums.sketchup.com/t/component-axes-for-use-in-dc/105120/5 "2019-10-03T17:47:24Z")

</div>

My workaround for the component parts was to create the component as a single face … then set the axis for that component with the blue axis in the “wrong” direction. Then, I flipped the part along the Blue Axis and extruded the face to the proper depth. Now, I have a part with the axis all going correctly. Was hoping for a similar workaround on a component made from multiple parts …

---

<div class="post-metadata">

**Author:** ![DaveR](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/daver/32/7601_2.png) [@DaveR](https://forums.sketchup.com/u/DaveR)\
**Post date:** [October 3, 2019, 5:52pm UTC](https://forums.sketchup.com/t/component-axes-for-use-in-dc/105120/6 "2019-10-03T17:52:04Z")

</div>

That sounds like a lot of unneeded work but if it gets the job done for you…

---

<div class="post-metadata">

**Author:** ![MikeWayzovski](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/mikewayzovski/32/98346_2.png) [@MikeWayzovski](https://forums.sketchup.com/u/MikeWayzovski)\
**Post date:** [October 3, 2019, 6:36pm UTC](https://forums.sketchup.com/t/component-axes-for-use-in-dc/105120/7 "2019-10-03T18:36:58Z")

</div>

Check this:

> [@Fabber: The SketchUp\>CNC/Laser cutting solution](https://forums.sketchup.com/t/fabber-the-sketchup-cnc-laser-cutting-solution/79779):
>
> Hey everyone! I’d like to share with you this extension I made for SketchUp: [www.getfabber.com](http://www.getfabber.com) This allows you to take your SketchUp models and go right to CNC toolpathing if you’re using Vectric’s CAM software (VCarve/Aspire) Our extension scans your SketchUp model, automatically flattens it and sends to VCarve/Aspire where we automatically build all of your toolpaths. Here’s the splashy intro video: [Fabber to Vectric - YouTube](https://youtu.be/4uVn6xAzY5w) If you really want to dig into the workflow you can check here…
