# Beginner -- how do I do THIS?

**URL:** <https://forums.sketchup.com/t/beginner-how-do-i-do-this/56701>\
**Category:** SketchUp\
**Tags:** sketchup\
**Created:** [December 2, 2017, 8:46am UTC](https://forums.sketchup.com/t/beginner-how-do-i-do-this/56701 "2017-12-02T08:46:04Z")\
**Posts on this page:** 9\
**Page:** 1

<div class="post-metadata">

**Author:** ![tkarl](https://avatars.discourse-cdn.com/v4/letter/t/8797f3/32.png) [@tkarl](https://forums.sketchup.com/u/tkarl)\
**Post date:** [December 2, 2017, 8:46am UTC](https://forums.sketchup.com/t/beginner-how-do-i-do-this/56701/1 "2017-12-02T08:46:04Z")

</div>

Woodworker here. I cannot seem to do what I want to do. I’m trying to draw a board that has a radius = to the board’s width; and also has a hole in it that needs to be located in another board. Simple? I thought so too!

 ![Folding Table](https://global.discourse-cdn.com/sketchup/original/3X/9/6/96482aefda75619a805e24ca79b33503ef2d07dc.JPG)

I’ve tried a number of things. Notes: After I make the radius shown, I cannot click on the extension lines to get the edge. If I make the hole first, then the circle tool WILL NOT draw a larger circle over a smaller hole – even with Guides drawn! The attached photo shows how far I got. I used RoundCorners to get the outer curve. Now, I cannot locate the board where I want it – inside the 4 boards forming a rectangle. Both holes need to line up. I got the hole in the other board by creating a solid cylinder through both boards, then using Trim.

Is there an easier way? I can do this like falling off a log in my other CAD package.

Please help!

---

<div class="post-metadata">

**Author:** ![simoncbevans](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/simoncbevans/32/15904_2.png) [@simoncbevans](https://forums.sketchup.com/u/simoncbevans)\
**Post date:** [December 2, 2017, 9:25am UTC](https://forums.sketchup.com/t/beginner-how-do-i-do-this/56701/2 "2017-12-02T09:25:13Z")

</div>

You need to upload the file not just an image.

Are you trying to move the radiused piece inside the frame, lining up the holes? If so, that should be pretty easy.

---

<div class="post-metadata">

**Author:** ![Cotty](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/cotty/32/251290_2.png) [@Cotty](https://forums.sketchup.com/u/Cotty)\
**Post date:** [December 2, 2017, 9:37am UTC](https://forums.sketchup.com/t/beginner-how-do-i-do-this/56701/3 "2017-12-02T09:37:56Z")

</div>

one way to create this…

 ![image](https://global.discourse-cdn.com/sketchup/original/3X/0/5/05d2eb3671f2dfef2af5fa45786e8a74ababa923.png)[samehole.skp](https://forums.sketchup.com/uploads/short-url/vHuGYaGIvLqbAQQmtEKjVRE8XD6.skp) (89.2 KB)

---

<div class="post-metadata">

**Author:** ![DaveR](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/daver/32/7601_2.png) [@DaveR](https://forums.sketchup.com/u/DaveR)\
**Post date:** [December 2, 2017, 11:39am UTC](https://forums.sketchup.com/t/beginner-how-do-i-do-this/56701/4 "2017-12-02T11:39:24Z")

</div>

You might also consider using the 2-Point Arc tool to radius the end of the piece.

[https://forums.sketchup.com/uploads/short-url/hNbS5XjzdyrVWyhkYovhswDYISM.mp4](https://forums.sketchup.com/uploads/short-url/hNbS5XjzdyrVWyhkYovhswDYISM.mp4)

In the video I’m leveraging one of the benefits of using components to make a matching counterpart of the rail with the hole in it. And then I copied the rail, made it unique, and rounded the end of the new copy leaving the holes aligned and saving some time in the process.

---

<div class="post-metadata">

**Author:** ![tkarl](https://avatars.discourse-cdn.com/v4/letter/t/8797f3/32.png) [@tkarl](https://forums.sketchup.com/u/tkarl)\
**Post date:** [December 2, 2017, 6:29pm UTC](https://forums.sketchup.com/t/beginner-how-do-i-do-this/56701/5 "2017-12-02T18:29:46Z")

</div>

Everything was great up until the very last – I could not find a reference point to move the rounded piece to the inside of the four boards – so that the radius touches the midpoint of the inner surface of the long board.

---

<div class="post-metadata">

**Author:** ![DaveR](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/daver/32/7601_2.png) [@DaveR](https://forums.sketchup.com/u/DaveR)\
**Post date:** [December 2, 2017, 6:34pm UTC](https://forums.sketchup.com/t/beginner-how-do-i-do-this/56701/6 "2017-12-02T18:34:05Z")

</div>

How about uploading the SKP file so we can see what you’ve got?

---

<div class="post-metadata">

**Author:** ![tkarl](https://avatars.discourse-cdn.com/v4/letter/t/8797f3/32.png) [@tkarl](https://forums.sketchup.com/u/tkarl)\
**Post date:** [December 2, 2017, 7:02pm UTC](https://forums.sketchup.com/t/beginner-how-do-i-do-this/56701/7 "2017-12-02T19:02:15Z")

</div>

I got it! The procedures I was missing were: 1) to create the circles OUTSIDE the component; and 2) Use a “Paste in Place” command to paste inside the component! In my Sketchup, the “Cleanup” of the radii edges is called “Softening” in the Rt-Clk menu. Ithen hid the long piece, and moved the radiused part, using the quadrant-point of the radiused edge, and moved it to the midpoint of the cross-piece. Done!

Thanks! In the future, I will attach the SKP file.

---

<div class="post-metadata">

**Author:** ![tkarl](https://avatars.discourse-cdn.com/v4/letter/t/8797f3/32.png) [@tkarl](https://forums.sketchup.com/u/tkarl)\
**Post date:** [December 2, 2017, 7:09pm UTC](https://forums.sketchup.com/t/beginner-how-do-i-do-this/56701/8 "2017-12-02T19:09:04Z")

</div>

OP here, here is the completed file:  
[Folding Table fixed.skp](https://forums.sketchup.com/uploads/short-url/2rIEv3SD89zL6yqYo2y7hqOk7XR.skp) (191.3 KB)

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/sketchup/original/3X/f/2/f2a121500b085ed60806607a82720b092d800bb3.png) [@system](https://forums.sketchup.com/u/system)\
**Post date:** [March 4, 2018, 11:09am UTC](https://forums.sketchup.com/t/beginner-how-do-i-do-this/56701/9 "2018-03-04T11:09:17Z")

</div>

Closed on March 4, 2018, 11:09am UTC

This topic was automatically closed 91 days after the last reply. New replies are no longer allowed.
