# 2D pattern from 3D shape

**URL:** <https://forums.sketchup.com/t/2d-pattern-from-3d-shape/124376>\
**Category:** SketchUp\
**Created:** [May 4, 2020, 7:29pm UTC](https://forums.sketchup.com/t/2d-pattern-from-3d-shape/124376 "2020-05-04T19:29:00Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![endlessfix](https://sea2.discourse-cdn.com/sketchup/user_avatar/forums.sketchup.com/endlessfix/32/148757_2.png) [@endlessfix](https://forums.sketchup.com/u/endlessfix)\
**Post date:** [May 4, 2020, 7:53pm UTC](https://forums.sketchup.com/t/2d-pattern-from-3d-shape/124376/4 "2020-05-04T19:53:57Z")

</div>

Ok I have a guess, I think you want to flatten the cone section so you can derive a 2d pattern. There are plugins for this, here is a native solution. I took as single facet of your cone and laid it flat. Then I drew two lines on the long edges to find the new center and rotate copied the 16 faces around that center. Is this the idea?

[Wedge (1).skp](https://forums.sketchup.com/uploads/short-url/u9IKCVk8FHVhSrtclk2aypdJwjo.skp) (42.6 KB)

 ![Screen Shot 2020-05-04 at 12.45.48 PM](https://global.discourse-cdn.com/sketchup/original/3X/c/3/c3b49903df4d7a8c2ba2e99c595072c83c5bdf93.png) ![Screen Shot 2020-05-04 at 12.48.31 PM](https://global.discourse-cdn.com/sketchup/original/3X/5/9/5973fdd0eb7ad3c6b87cfd48b2cbb5283199eb5f.png) ![Screen Shot 2020-05-04 at 12.49.31 PM](https://global.discourse-cdn.com/sketchup/original/3X/f/0/f0cedf50ce73ba28440d2de589465a5ab8c810d2.jpeg) ![Screen Shot 2020-05-04 at 12.59.09 PM](https://global.discourse-cdn.com/sketchup/original/3X/8/8/880c759df2c6783c4457c5be3a6150e596c3ddd7.png)

---

_[View the full topic](https://forums.sketchup.com/t/2d-pattern-from-3d-shape/124376)._
